Diagnostic Program - Toshiba T3300SL Maintenance Manual

3.1

Diagnostic Program

This chapter explains how to use the T3300SL's Diagnostic Program (TESTCE33) to test the
functions of the T3300SL's hardware modules. The Diagnostic Program is stored on the T3300SL
Diagnostic Disk. The Diagnostics Program consists of 18 programs that are divided into the Service
Program Module (DIAGNOSTICS MENU) and the Test Program Module (DIAGNOSTIC TEST
MENU).
The Service Program Module consists of the following eight functions:
1. DIAGNOSTIC TEST
2. HARD DISK FORMAT
3. HEAD CLEANING
4. LOG UTILITIES
5. RUNNING TEST
6. FDD UTILITIES
7. SYSTEM CONFIGURATION
8. SETUP
The Test Program Module contains the following ten functional tests. These are all located within
the Diagnostic Test function of the Service Program Module.
1. SYSTEM TEST
2. MEMORY TEST
3. KEYBOARD TEST
4. DISPLAY TEST
5. FLOPPY DISK TEST
6. PRINTER TEST
7. ASYNC TEST
8. HARD DISK TEST
9. REAL TIMER TEST
10. NDP TEST
To execute the T3300SL Diagnostic Program you will need the following equipment to perform
some of the tests:
T3300SL Diagnostic Disk
Formatted working disk for the floppy disk drive test
Cleaning disk kit to clean the floppy disk drive heads
Printer wraparound connector for the printer wrap-around test
RS-232-C wraparound connector for the RS-232-C port wraparound test
The following sections detail the tests within the Diagnostic Test function of the Service Program
Module. Refer to Sections 3.16 through 3.22 for detailed information on the remaining seven
Service Program Module functions.
3-5