Toshiba T3300SL Maintenance Manual page 53

3. To execute the Diagnostic Test function from the DIAGNOSTICS MENU, type 1 and press
Enter. The following DIAGNOSTIC TEST MENU will appear:
TOSHIBA personal computer T3300SL DIAGNOSTICS
version x.xx (c) copyright TOSHIBA Corp. 1991
DIAGNOSTIC TEST MENU :
1 - SYSTEM TEST
2 - MEMORY TEST
3 - KEYBOARD TEST
4 - DISPLAY TEST
5 - FLOPPY DISK TEST
6 - PRINTER TEST
7 - ASYNC TEST
8 - HARD DISK TEST
9 - REAL TIMER TEST
10 - NDP TEST
88 - FDD & HDD ERROR RETRY COUNT SET
99 - EXIT TO DIAGNOSTICS MENU
PRESS [1] - [99] KEY
Refer to Sections 3.4 through 3.13 for detailed descriptions of Diagnostic Tests 1 through 10.
Test menu option 88 sets the floppy disk drive and hard disk drive error retry count. Option
99 exits the DIAGNOSTIC TEST MENU and returns the display to the DIAGNOSTICS
MENU.
4. Select the test number you want to execute and press Enter. A test-specific display will
appear. For example, the following display shows the System Test which appears when you
type 1 and press Enter.
SYSTEM TEST
SUB-TEST : xx
PASS COUNT: xxxxx
WRITE DATA: xx
ADDRESS: xxxxxx
SUB-TEST MENU :
01 - ROM checksum
02 - HW status
99 - Exit to DIAGNOSTIC TEST MENU
SELECT SUB-TEST NUMBER ?
NOTE: The menu displayed by your T3300SL may be slightly different from the one shown
above.
xxxxxxx
T3300SL DIAGNOSTIC TEST Vx.xx
[Ctrl]+[Break] ; test end
[Ctrl]+[C]
ERROR COUNT: xxxxx
READ DATA: xx
STATUS: xxx
; key stop
3-7