Telephone Wall Mounting - Toshiba STRATA CTX100 Installation And Maintenance Manual

Station Apparatus
Tilt Stands and Wall Mounting
Figure 8-23 Tilt Stands in Raised Position for DKT and Two ADMs

Telephone Wall Mounting

This section explains how to mount digital telephones to a wall. See the manufacturer's
documentation for instructions on mounting standard phones.
Notes
Digital telephones equipped with BPCIs or PDIU-DI2s cannot be wall mounted.
●
DKT3014-SDL equipped with a BHEU cannot be wall-mounted.
●
2000-series digital telephones with headsets can only be wall mounted with an HHEU2.
●
➤
To mount digital telephones
Refer to
1. Loosen the captive screws, and remove the
telephone base.
2. Using a suitable cutter, remove the handset
hanger from the base.
3. Insert the handset hanger in the slot on the front
of the phone. The hanger fits in the notch on the
handset cradle.
4. Rotate the telephone base 180 degrees and
secure it to the telephone with its four captive
screws.
Note Tilt up the LCD of the DKT3014-SDL before
fixing the base.2000-series telephone option
8-26
Figures 8-24~8-26 and the following steps.
5849
Handset Hanger
1478
Figure 8-24 Removing the Telephone
Strata CTX I&M
Plastic Tab
10/02