BRI Call Monitor
The call-monitor jack located on the RBSU enables you to use a PC or ASCII terminal to monitor
the BRI, D-channel call setup, layer-2 and layer-3 data (refer to
information about connecting the monitor jack).
call setup message information that is available from the RBSU call-monitor jack.
Figure 5-33
Outgoing Call Setup Output of BRI Call Monitor
Strata CTX I&M
10/02
Figure 5-30 on page 5-34
Figures 5-33
and
5-34
provide examples of BRI
ISDN Interfaces
Call Monitor Output for ISDN
for
5-37