Commissioning; Commissioning The Telephone - Auerswald COMfortel 1200 Setup Manual

Hide thumbs Also See for COMfortel 1200:

Table of Contents

Available languages

This section describes how to commission the telephones and the answering machine on the

COMfortel 1400 for the first time in a stepwise procedure. After a successful initial commis-

sioning, you will be able to make calls. You can customise your telephone and the answering

machine using the PC configuration described at the end of this section.

Requirements

–

PBX, switched on (connected to 230 V mains)

–

The internal telephone number for the telephone entered in the configura-

tion on the internal S

Note: Only connect one ISDN device for each internal subscriber tele-

phone number to your PBX.

–

For the operation as system telephone: PBX according to the proper use

(see Important Information > Proper Use)

Insert the plug of the ISDN cable included in the package into the jack

marked with

Fig. 15: Connecting to the PBX

Insert the other ISDN cable plug into the ISDN socket connected to the

PBX.

COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015

Commissioning

on the bottom of the telephone.

The telephone starts up. In the meantime, the Auerswald company icon

is shown on the display.

The menu for language selection is displayed.

or U

port on the PBX

Commissioning

Table of Contents

Comfortel 1400