Technical Data - Auerswald COMfortel 1200 Setup Manual

 Read the instructions for the device and keep them for future reference.
The devices COMfortel 1200 and 1400 are system telephones. These system
telephones are intended for use in closed, dry rooms. System telephones are
intended exclusively for connecting to an internal S
PBXs from Auerswald:










Note: Connecting to a PBX from another manufacturer or to the external S
connection of a network provider is not intended.

Technical Data

Power voltage
Power consumption
System connection
Memory
Displays
COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015
COMpact 3000 analog/ISDN/VoIP (as of firmware version 2.4.L)
COMpact 2206 USB (as of firmware version 2.4B)
COMpact 4410 USB (as of firmware version 2.4B)
COMpact 4000
COMpact 5000/R
COMpact 5010 VoIP (as of firmware version 4.2E)
COMpact 5020 VoIP (as of firmware version 4.2E)
COMmander 6000/R/RX (as of firmware version 6.0E)
COMmander Basic.2/19" (as of firmware version 4.2E)
COMmander Business/19" (as of firmware version 4.2E)
COMfortel 1200
Supply via internal S
Min. 1.1 W, max. 2.0 W
Internal S port or U
0
COMpact 3000 analog/ISDN/VoIP, COMpact 2206 USB,
COMpact 4000, COMpact 4410 USB, COMpact 5000/R,
COMpact 5010 VoIP, COMpact 5020 VoIP,
COMmander 6000/R/RX, COMmander Basic.2/19", COM-
mander Business/19"
-
14 LEDs, partially polychromatic;
monochrome FSTN display,
128 x 32 pixels, background
lighting
Important Information
or U
0
COMfortel 1400
or U port from the PBX
0 P0
port of one of the following PBXs:
P0
MicroSD/SDHC card, up to
8 GB recommended (not
included in the package)
14 LEDs, partially polychro-
matic;
3.5 " TFT colour display,
320 x 240 pixels, back-
ground lighting
port of the following
P0
0
33