Connecting A Headset - Auerswald COMfortel 1200 Setup Manual

Hide thumbs Also See for COMfortel 1200:

Table of Contents

Available languages

Preparation

Insert the other RJ-10 connector of the spiral cord into the jack on the re-

ceiver.

Connecting a Headset

Requirements

–

A wired headset corresponding to the technical data listed on page 35.

Insert the headset connector:



Guide the cable to the outside using the corresponding cable channel.

Fig. 14: Connecting a headset

COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015

Fig. 13: Connecting the receiver

COMfortel 1200: Pull the connector of the receiver out of the socket at

the back marked with

socket instead (see Fig. 13).

COMfortel 1400: Insert the connector of the headset into the jack

labelled with

on the lower side of the telephone (see Fig. 14).

and insert the connector of the headset into this

Table of Contents

Comfortel 1400