Preparing The Telephone For Use As Wall-Mounted Unit - Auerswald COMfortel 1200 Setup Manual

Preparation
Fig. 10: Feet of the casing

Preparing the Telephone for Use as Wall-mounted Unit

Requirements
– Tools: Small screw driver (approx. 4 mm wide)
1.
Insert the screw driver into the slot at the lower edge of the receiver recess
(see Fig. 11).
Fig. 11: Inserting a screw driver
40
COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015