Using The Scanner; Documents - Canon DR-2580C Service Manual

Using the Scanner

Documents

This scanner can scan documents ranging in size from business cards and
checks to A4 size documents. The size of documents that can be scanned is
shown below.
Eject Direction (*1)
Width
Length
Weight (*3)
Feeding documents
are separated
Feeding documents
are not separated
Business Cards
(*1) For information about the output directions, see "Document Eject Tray,"
on p. 47.
(*2) If the document is longer than 297 mm, use the Bypass mode with Feed
Selection Lever for document scanning (See p. 53.).
(*3) For information about feeding a document, see "Placing a Document for
Scanning," on p. 50.
IMPORTANT
A document must meet the following criteria to be scannable:
• When scanning a multipage document, pages must be grouped together so
that they have the same size, thickness, and weight. Scanning different
types of paper at one time can cause the scanner to jam.
• When using the U-turn path to scan a document that is longer than 297
mm, use the Bypass mode and feed pages one at a time. Attempting to use
the U-turn path for continuous feed scanning of a document that is longer
than 297 mm can cause the document pages to fall onto the feed tray and
become jammed in the scanner.
• Scanning documents before the ink is dry can cause problems with the
scanner. Always make sure that the ink on a document is dry before
scanning it.
U-Turn Path
53 mm to 216 mm
70 mm to 355.5 mm (*2)
52 to 128g/m 2
0.06 mm to 0.15 mm
2
42 to 157g/m
0.05 mm to 0.20 mm
Cannot be scanned
Straight Path
53 mm to 216 mm
70 mm to 355.5 mm
42 to 157g/m 2
0.05 mm to 0.20 mm
2
42 to 157g/m
0.05 mm to 0.20 mm
Can be scanned
(not separated)
Size: 53.9 mm x 85.5 mm
Thickness:
0.76 ± 0.08 mm
without embossing
43
Using the Scanner