Rear Cover - Canon DR-2580C Service Manual

* Notes on disassembly and assembly
1) The upper unit sometimes closes while
working. Thus, be careful not to get
your fingers caught in the unit.
2) Many of parts are fixed with the fitting
parts instead of screws or E rings. Do
not deform such parts too much while
working because they would be dam-
aged. However, do not leave a gap
between the parts when installing them.
3) Prepare a thin and flat head tool such
as precision driver because it is nec-
essary to unhook some fitting parts.
COPYRIGHT © 2005 CANON ELECTRONICS INC.
I. EXTERNAL COVERS

1. Rear Cover

1) Fully open the rear cover.
2) Bend the left or right arm 1 , unhook the
* Notes on assembly
CANON DR-2580C FIRST EDITION APR. 2005
CHAPTER 3 DISASSEMBLY/ASSEMBLY
fitting parts, and remove the rear cover
2 .
Figure 3-101
Do not deform the grounding plate which
is put on one of the fitting parts.
3-1