Canon DR-2580C Service Manual page 96

CHAPTER 4 INSTALLATION & MAINTENANCE
2. Protection Material Removal
1) Remove the protection tape from the main
body.
Eject tray extension
Figure 4-102
Note: When removing the protection tape
holding the eject tray extension, remove
it while holding the eject tray extension
by hand.
2) Push both sides of the rear cover, open it
backward, and remove the protection
sheet.
Figure 4-103
3) Push both sides of the rear cover and
close it.
4-2
Rear cover
COPYRIGHT © 2005 CANON ELECTRONICS INC.
4) Open the pickup tray forward.
Pickup tray
Figure 4-104
5) Push the OPEN knob from both sides,
open the upper unit slowly, and remove
the protection tape and protection sheet.
Figure 4-105
6)
Close the upper unit slowly. Then push both
sides of the upper unit with both hands and
close it.
CANON DR-2580C FIRST EDITION APR. 2005
Upper Unit