Canon DR-2580C Service Manual page 82

CHAPTER 3 DISASSEMBLY/ASSEMBLY
C. Drive System (Motor and
Others)
1. Carry Motor
1) Remove the left cover.
2) Remove the connector 1 and 2 screws
2 . And slide the carry motor 3 to the
right to remove it.
Note: The left side connector in the figure is for
the carry motor.
Figure 3-318
* Notes on assembly
Reeve the timing belt on the gear of the
carry motor. If it is hard to do it, remove the
motor mounting plate. For more details,
refer to the section "Drive Unit."
3-16
2. Pickup Motor
1) Remove the left cover.
2) Remove the connector 1 and 2 screws
2 . And remove the carry motor 3 .
Note: The right side connector in the figure is
COPYRIGHT © 2005 CANON ELECTRONICS INC.
for the pickup motor.
Figure 3-319
CANON DR-2580C FIRST EDITION APR. 2005