Page 3 PREFACE This Service Manual describes necessary basic information for field service and maintenance for maintaining the product quality and functions of the DR-2580C. Contents Chapter 1: General description Features, specifications, name of parts, operation method Chapter 2: Functions and operation...
Page 5: Table Of Contents
VIII. ELECTRICAL PARTS LAYOUT .....2-35 CONTROL SYSTEM ......2-11 IX. PARTS LAYOUT OF EACH PCB ...2-37 IMAGE PROCESSING......2-14 CHAPTER 3 DISASSEMBLY & REASSEMBLY EXTERNAL COVERS ......3-1 III. LOWER UNIT.........3-10 UPPER UNIT..........3-4 FLATBED..........3-21 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 6 CONSUMABLE PARTS......4-6 CHAPTER 5 TROUBLESHOOTING ERROR DISPLAY........5-1 OPERATION TROUBLESHOOTING..5-16 SERVICE MODE ........5-2 AFTER REPLACING PARTS ....5-19 III. IMAGE TROUBLESHOOTING....5-13 APPENDIX GENERAL DIAGRAM......A-1 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 7 CHAPTER 1 GENERAL DESCRIPTION FEATURES ..........1-1 NAME OF PARTS ........1-7 SPECIFICATIONS........1-2 USER OPERATION .......1-10 III. PRECAUTIONS ........1-6 VI. USER MAINTENANCE ......1-12 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 9: Features
“Windows” is a trademark of Microsoft Corporation in the U.S. and other countries. Other company names and product names mentioned in this document are registered trademarks or trademarks of the respective companies. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 10: Specifications
Bundle software ISIS/TWAIN driver, CapturePerfect 3.0, Acrobat 7.0 Option 1) Flatbed unit 2) Barcode module Consumable parts Exchange roller kit (roller unit, retard roller) (commercial goods) Table 1-201 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 11 400 dpi 58 mm/sec 19 mm/sec 600 dpi 39 mm/sec 13 mm/sec *For big size of image data like A4/600dpi/color mode, docu- ment is fed with intermittence. Table 1-202 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 12 *Settings of reading are default. The numbers above may differ depending on the computer, the function settings and other con- ditions. For big size of image data, document is fed with intermittence. Table 1-203 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 13 Dimensions 315 (W) × 545 (D) × 82.5 (H) mm Flatbed itself: (tray closed) With DR-2580C: 315 (W) × 557 (D) × 155 (H) mm Weight Approx. 3.8 kg (with DR-2580C: Approx. 5.7 kg) Type of sensor CCD: 600 dpi, 5104 pixels (216 mm), Grayscale/RGB output...
Page 14: Precautions
This machine complies with the electro- magnetic wave interference standards (VCCI, FCC, etc.). However, the user might have to carry out countermeasures if the machine causes electromagnetic wave interference. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 15: Iv. Name Of Parts
Job buttons Pickup selection lever Eject tray/ upper unit Power indicator OPEN knob Document guide Eject tray extension 2 Document guide Pickup tray Eject tray extension Figure 1-401 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 16 Eject opening Eject selection lever Kensington slot : Straight path Down : U-turn path Figure 1-402 3. Side (interface) Power connector Option connector Power switch USB connector Figure 1-403 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 17 4. Flatbed unit (option) Pressure board (black) Flatbed (platen glass) Interface cable Scanning unit slide lock DR-2580C locking hook Auxiliary paper support plate DR-2580C locking hook Flatbed cover Figure 1-404 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 18: V. User Operation
3) Detailed settings 3.0 is used are shown for reference. Cap- turePerfect 3.0 uses an ISIS driver. 1) Main screen Figure 1-503 4) Filter Figure 1-501 Figure 1-504 1-10 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 19: Clearing Jams
6) Close the rear cover by pressing the both Figure 1-506 sides. 3) Push the OPEN knob from both sides and open the upper unit slowly. Figure 1-507 1-11 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 20: Vi. User Maintenance
5) Shading plates computer is started. Note: The message is not displayed when the operating system is Windows NT. Figure 1-601 1-12 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 21 1) Push the OPEN knob from both sides and Figure 1-605 open the upper unit slowly. 4) Detach the right side of the roller unit first and remove the roller unit. Figure 1-603 Figure 1-606 1-13 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 22 Figure 1-609 roller unit. c. Retard roller Removal • 1) Push the OPEN knob from both sides and open the upper unit slowly. Figure 1-608 Figure 1-610 1-14 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 25 READING SYSTEM .........2-5 VII. FLATBED UNIT ........2-31 III. FEED SYSTEM ........2-8 VIII. ELECTRICAL PARTS LAYOUT .....2-35 CONTROL SYSTEM ......2-11 IX. PARTS LAYOUT OF EACH PCB ...2-37 IMAGE PROCESSING......2-14 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 27: Outline
This section converts the AC power into processing section and a feed control the DC power by a supplied AC adapter section. and supplies it to the control PCB in the main body. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 28: Motor Drive
Control PCB Pickup motor Switch PCB Pickup roller Feed roller Torque limiter Retard roller Carry motor Registration roller Eject roller 1 Carry roller Eject roller 2 Figure 2-102 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 29: Electrical Circuits
PCB I/F Connector Reading unit (front) Control PCB CIS PCB Reading unit (back) CIS PCB Sensor Flatbed unit Switch PCB Motor Sensor, Switch Option Power Figure 2-103 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 30: Timing Chart
Pickup motor Reading speed Reading speed Carry motor * 1st document * 2nd document Pre-registrarion sensor Registration sensor Document reading Reversal→stopper; Closed, reading unit (lower); to fornt Figure 2-104 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 31: Reading System
The image data read are sent to the image processing section of the control PCB. Reading unit (upper) Document Reading unit (lower) Figure 2-201 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 32 As documents are being fed at regular speed while image data are read, the reading positions of RGB are shifted slightly. In the color dropout mode, only the LED of COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 33 When such motor normally rotates, the reading unit returns again to its original posi- tion. Carry motor Mechanical clutch Eject roller 1 Coupling plate Pickup side Reading unit (lower) Figure 2-204 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 34: Feed System
Registration roller Stopper Follower roller Flapper Eject roller 1 Figure 2-301 Note: The pickup roller and the feed roller make up a single unit called a roller unit. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 35 If non-separation is selected, the retard roller rotation becomes free and the separation function becomes invalid. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 37: Control System
Main body control Motor control section FB motor I/F section · FLASH_ROM · · SRAM · EEPROM Key switch section Detection sensor section Power control section Figure 2-401 2-11 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 38: Image Processing Control
1-dimensional gamma correction Other processing · Size detection · Black border Edge emphasis removal · Binder hole removal Binarizing · Others Data after image processing Figure 2-402 2-12 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 39 Other image processing are carried out inside the com- puter. The computer performs the image proc- essing according to the user settings after the shading correction. 2-13 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 41 5th line 6th line • 150 dpi 1st line (A+B)/2 (C+D)/2 (E+F)/2 (G+H)/2 2nd line (A+B)/2 (C+D)/2 (E+F)/2 (G+H)/2 3rd line (A+B)/2 (C+D)/2 (E+F)/2 (G+H)/2 Figure 2-501 2-15 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 42 Feeding speed (2 times as fast as 300 dpi) Figure 2-502 • 300 dpi Feeding speed • 150 dpi Feeding speed (same as 300 dpi) Figure 2-503 2-16 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 43 3-dimensional conversion table that suits the characteristics of this machine is pro- LEDS turned off vided to convert RGB values. After A/D Black conversion correction value Figure 2-504 2-17 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 44 For brightness adjustment in black and white mode, refer to the “Binarizing” section. White (255) Black White (255) Before conversion Figure 2-506 2-18 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 45 In this case, the bright- ness and contrast adjustments be- come invalid, and the unique gamma curve is given priority. White (255) Black White (255) Before conversion Figure 2-508 2-19 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 46 (B) of the conver- sion table. Target picture element (a) Output Target picture element : 1~64 Conversion table Main-scanning direction Figure 2-510 2-20 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 47 “slice level.” The image brightness is adjusted by changing this slice level. 1 picture element White 255 White Slice level Black Black 0 Document Output Figure 2-511 2-21 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 48 Output data Input data Error +6=(9-3)-0 (9-3)=6<8 → "0" Input Output Error of first row of Line 1 Error of first row of Line 1 Figure 2-513 2-22 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 49 The slice level is al- diffusion processing (simple binariz- ways set at median. ing). Digital signal output With error diffusion processing Without error diffusion processing Figure 2-515 2-23 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 51 This may also happen when the skew correction or black frame removal described later is performed. Figure 2-519 2-25 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 52 Thus, no letters vanish. (Figure (Figure 2-520) 2-521) Specifed size Figure 2-520 Outer shape is extracted Tangent line is processed Outside turns white Figure 2-521 2-26 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 53 The front and back sides of document are read. Binder hole Figure 2-523 ii) The image of the back side is reversed. Figure 2-524 2-27 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 54 If they are the same, those black objects are determined as binder holes. And then, they are removed from the front image. 2-28 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 55 /(circumference) ceeds the predefined number, the data are recorded. If not, the data are not re- corded. Target area Figure 2-527 2-29 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 56: Power Supply
The power for the optional flatbed unit is 100-240V Control PCB 50/60Hz +16V +16V AC adapter +3.3V DC/DC converter Figure 2-601 2-30 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 57: Flatbed Unit
Dimensions 315 (W) × 545 (D) × 82.5 (H) mm Flatbed itself: (tray closed) With DR-2580C: 315 (W) × 557 (D) × 155 (H) mm Weight Approx. 3.8 kg (with DR-2580C: Approx. 5.7 kg) Type of sensor CCD: 5340 picture elements × 4 lines (RGB/Grayscale)
Page 58 GRAY glass and cover. Figure 2-701 Shading plate Document board glass Optical unit Mirror 3 Lamp Mirror 2 Mirror 4 Lens Mirror 1 Figure 2-702 2-32 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 59 A shaft is installed as a guide for the unit move- ment. Document board glass Guide Optical unit Shaft Shaft Motor Timing belt Stopper Figure 2-703 2-33 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 60 3) Control System Driving signals for the CCD and motors are supplied from the main body of DR-2580C. After analog image data are converted into digital data in the optical CCD PCB, those data are output to the main body of DR-2580C.
Page 61: Electrical Parts Layout
Symbol Sensor Power supply sensor Rear cover sensor Upper opening sensor Document board sensor Shading sensor Pre-registration sensor Registration sensor Motor Pickup motor Carry motor Table 2-801 2-35 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 62 CHAPTER 2 FUNCTION & OPERATION 2. Flatbed Figure 2-802 Category Name Symbol Sensor Optical unit sensor Motor Optical motor Lamp Light source lamp Table 2-802 2-36 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 63: Parts Layout Of Each Pcb
Lighting: Normal power supply J501 CIS PCB (front) J502 CIS PCB (back) Table 2-902 J701 USB I/F J1000 Switch PCB J1001 Document board PCB J2000 Ultrasonic sensor PCB Table 2-901 2-37 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 64 Figure 2-902 Connector Description J200 Control PCB J201 Pickup motor J202 Carry motor Table 2-903 Description Lighting: Normal LED200 Blinking: Scanner abnormal (jams and so on) Table 2-904 2-38 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 65: I. External Covers
CHAPTER 3 DISASSEMBLY & REASSEMBLY EXTERNAL COVERS ......3-1 III. LOWER UNIT.........3-10 UPPER UNIT..........3-4 FLATBED..........3-21 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR2580C FIRST EDITION APR. 2005...
Page 67: Rear Cover
Figure 3-101 * Notes on assembly Do not deform the grounding plate which is put on one of the fitting parts. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 68: Left Cover
Do not pinch the cable. In case that the the eject selection lever in the mounting power switching lever comes off, be sure positions indicated on the main frame. to put it back. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 69 Note: The arm 3 of the left and right reading units would come off after removing the upper cover assembly. Figure 3-105 * Notes on assembly Do not pinch the cable. Figure 3-104 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 70: Ii. Upper Unit
3 which are put on the reading unit. Remove the arm “A” first. There are 4 arms installed in the right and left sides. Figure 3-203 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 71 When installing the upper cover, put the cable 1 in the 2 cable holders 2 to prevent them from being caught in the upper cover. Figure 3-204 Figure 3-206 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 72 The coil spring for the follower roller The coil spring for the follower roller (ahead) is metallic color. (behind) is white. Figure 3-207 Figure 3-208 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 73 3) Remove the open/close knob 1 . Figure 3-209 Figure 3-211 4) Unhook the fitting parts 1 with a thin and flat head tool and remove the drive gear Figure 3-210 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 74 (ahead) 2 . Figure 3-212 3) Remove the reading unit 1 and discon- nect the cable 2 which is connected to its back side. Figure 3-213 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 75 3) Draw the CIS unit 2 out of the reading holder 1 . Note: Prevent scraps of paper or other foreign particles from getting into the CIS unit. Figure 3-215 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 76: Lower Unit
PCB unit and remove the Figure 3-301 PCB unit 2 . Note: Be careful not to lose the sensor cover 3 because it comes off. Figure 3-303 3-10 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 77 J502. The cable 2 which is con- nected to the upper unit is aluminum shielded, and it should be connected to the connector J501. Figure 3-305 Figure 3-304 3-11 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 78 4) Remove the motor drive unit. For more details, refer to the section “Drive Unit.” Figure 3-308 * Notes on assembly Make sure if the registration roller smoothly rotates after the completion of assembly. 3-12 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 79 Figure 3-312 * Notes on assembly Make sure if the retard roller smoothly rotates after the completion of assembly. Figure 3-310 3-13 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 80 Figure 3-315 Figure 3-313 3) Insert thin and flat head tools into the 2 fitting parts 1 and remove the roller cover 2 . Figure 3-314 3-14 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 81 3 out and unhook Unhook the fitting parts to remove the bearing stopper 3 . the fitting parts mounted on the back side. Figure 3-317 Figure 3-316 3-15 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 82 Reeve the timing belt on the gear of the carry motor. If it is hard to do it, remove the motor mounting plate. For more details, refer to the section “Drive Unit.” 3-16 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 83: Drive Unit
Figure 3-320 * Notes on assembly Before installing the drive unit, install the gear, grounding plate and lever in the appropriate positions. Figure 3-321 3-17 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 84 3) Disconnect the cable 1 and remove the Note: Prevent scraps of paper or other foreign reading unit 2 . particles from getting into the CIS unit. Figure 3-325 Figure 3-323 3-18 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 85 On the other hand, their reading holders are different in shape. And no coil spring is included in the cover of the lower unit. 3-19 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 86 * Notes on assembly Note: The screws on the USB connector are Before installing the switch PCB, install M3 and the others are M2.5. the contact cover. Figure 3-327 3-20 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 88 3) Slowly close the flatbed cover so that the black pressure board does not shift. And gently press the cover to stick the black pressure board to it. 3-22 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 90 1 on the pro- jection 2 of the contact assembly. Hold the cable with the 2 cable holders 3 . Figure 3-407 Figure 3-409 3-24 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 91: Motor Unit
Adjust the belt tension so that teeth are not skipped. If it is too tight, vibration be- comes excessive and it is not good. 3-25 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 93 CHAPTER 4 INSTALLATION & MAINTENANCE INSTALLATION ........4-1 LIST OF PERIODIC MAINTENANCE PERIODICALLY REPLACED PARTS ..4-5 ITEMS............4-7 III. CONSUMABLE PARTS ......4-6 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 95: Installation
(only for 100 V and (only for 100 V 120 V models) model) Figure 4-101 The DR-2580C setup disk is inserted in the Retain the outer packaging box and packing • • startup manual. materials because they are required to store and transport this machine.
Page 96 3) Push both sides of the rear cover and Close the upper unit slowly. Then push both close it. sides of the upper unit with both hands and close it. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 97 1) Install the supplied document guide adapters as required. 2) Set documents. Retard roller 3) Run the application software according to the operation procedure. Figure 4-106 4) Check operation results. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 98 Figure 4-107 2) DR-2580C installation Set the DR-2580C so that the projection on this unit is inserted into the hole in the bottom of the DR-2580C ( 1 ) and slide it forward ( 2 ). Figure 4-110 Figure 4-108 COPYRIGHT ©...
Page 99: Periodically Replaced Parts
2. Consumable parts shall be replaced when becoming no good by users or service techni- cians, and which are assigned as service parts and/or commercially available products. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 100: Consumable Parts
Replacement is done by users. Table 4-301 Note: Each roller is assigned as service parts and also assigned as commercially available products for a set named an exchange roller kit. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 101: Items
Reading glass Reading section Shading plate Table 4-401 Remove the paper dust and other dust on the feed section including document detection sensors as required. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 103 CHAPTER 5 TROUBLESHOOTING ERROR DISPLAY ........5-1 OPERATION TROUBLESHOOTING ..5-16 SERVICE MODE........5-2 AFTER REPLACING PARTS ....5-19 III. IMAGE TROUBLESHOOTING ....5-13 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 105: Chapter 5 Troubleshooting
1. Power Indicator The contents of the error message differ The DR-2580C does not have an error depending on the software that is used. display area, but some errors are indicated Most error messages are related to im- by the power indicator on the operation proper user operation and document jams.
Page 106: Service Mode
Each service mode is performed from this screen. 1. Outline Table 5-201 shows the list of the service The service mode of the DR-2580C can modes. be executed by installing on the computer for servicing the service mode software located in Button name/Functions the setup disk provided with the DR-2580C.
Page 107 Power ON the computer for servicing and Connect the computer for servicing with start up the OS (Windows). the DR-2580C using a USB interface ca- Set the DR-2580C setup disk supplied ble. with this machine. After powering ON the DR-2580C, power Copy the “\Driver\Tools”...
Page 108: All Adjustment
CHAPTER 5 TROUBLESHOOTING 4. All Adjustment Note: After the DR-2580C is connected to the computer and the computer is powered This mode is used to adjust all image ON for the first time, a screen requesting reading adjustments at the same time. Since installation of “New Hardware”...
Page 109 If adjustment is interrupted, the adjustment value remains the value prior to adjustment. Sample error screens are shown below. Figure 5-206 Figure 5-205 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 110 3) The adjustment starts automatically. The progress screen appears on the display. 4) When the adjustment is finished, the pro- gress screen disappears and the service screen appears. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 111: Dcon Check
Shading sensor The reading unit (lower) is at the shading position. Pre-registration The pre-registration sensor sensor detects a document. Rear cover The rear cover is sensor open. Table 5-202 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 113 To set the long document mode, change the setting to [1000.0(mm)] and press the [OK] button. Figure 5-215 Figure 5-214 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 114: Check Device
10. About This mode is used to check the versions of This mode is used to check the version of the internal devices of the DR-2580C. the software for this service mode. When [Check Device] is selected on the When [About] is selected on the service service screen, the version screen is dis- screen, the version screen is displayed.
Page 115 [Set] on the lower right of the screen is se- lected after the value is changed, the changed value is determined. To close the screen, press the [Close] button. 5-11 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 116 CHAPTER 5 TROUBLESHOOTING 12. Firm Load This mode is used to change the firmware of the DR-2580C. For details, refer to the service information issued during firmware changes. Be careful not to execute this mode by mistake. Operation procedure outline •...
Page 117: Iii. Image Troubleshooting
Reading unit Is the problem solved when the End. reading unit is replaced? Control PCB Is the problem solved when the End. control PCB is replaced? Table 5-301 5-13 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 118 Reading unit Is the problem solved when the End. reading unit is replaced? Control PCB Is the problem solved when the End. control PCB is replaced? Table 5-303 5-14 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 119 Motor (M3) Is the problem solved when the End. optical motor is replaced? Optical unit Is the problem solved when the End. optical unit is replaced? Table 5-303 5-15 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 120: Iv. Operation Troubleshooting
Does the LED of the control such as sensors, motors, PCB light or blink properly? etc. Is the problem solved when the End. switch PCB or control PCB is replaced? Table 5-401 5-16 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 121 Is the operation normal when Replace the motor. checking the operation in the service mode? Control PCB Is the problem solved when the End. control PCB is replaced? Table 5-403 5-17 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 122 “Reading side” Is the “Reading side” set to Change the settings. setting “Flatbed”? Motor (M3) Is the problem solved if the End. optical motor is replaced? Table 5-405 5-18 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 123: After Replacing Parts
Perform “Document Sensor Adjustment” in the service mode when the document de- tection failures occur after replacing or reas- sembling parts related to the document board sensor. 5-19 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 127 CCD PCB Optical motor FLAT_B* PCB B FLAT_A* Optical unit FLAT_A sensor J101 Inverter HIGH VOLTAGE (BLUE CABLE) Lamp LOW VOLTAGE Flatbed scanner unit (option) (WHITE CABLE) J103 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDITION APR. 2005...
Page 129 Prepared by Quality Assurance Center Canon Electronics Inc. 3-17-7 Shibaura, Minato-ku Tokyo 108-0023, Japan FIRST EDITION (APR. 2005) [63999]...
Page 130 0305TG...
Page 131: Parts Catalog
CATALOG FIRST EDTION M11-0521 100V M11-0523 120V M11-0524 220-240V DR-2580C M11-0525 220-240V CA M11-0526 220-240V KR M11-0529 220-240V CN M18-0831 100V F/B UNIT M18-083A 120V/220-240V MY8-31A4-000 APR. 2005 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 132 Quality Assurance Center Canon Electronics Inc. 版権所有，無断転載，引用を禁ず。 Copyright  2005 Canon Electronics Inc 本マニュアルについては，機密保持等その取扱には十分注意して下さい。万一取扱を誤まりますと法律で処罰されることがあります。 Use of this manual should be strictly supervised to avoid disclosure of confidential information. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 133 UPPER UNIT 上下読取部 READING UNIT, UPPER/LOWER 下部ユニット－１ LOWER UNIT-1 下部ユニット－２ LOWER UNIT-2 下部ユニット－３ LOWER UNIT-3 電装部 ELECTRICAL COMPONENTS ASSEMBLY フラットベッド・スキャナ・ FLATBED SCANNER UNIT (OPTION) ユニット（オプション）部品索引表 NUMERICAL INDEX COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 134 部品を発注する際は，必ずこの番号を明示してくださできます。い。NPNと記載されている部品はサービスパーツに設索引表の左の欄が部品番号 (PART No.) ，中央の欄が定されていません。部品図番号 (FIGURE No.) とキーNo. (KEY No.) ，右の注：部品番号の末尾３桁を訂番といいます。部品改良等欄が使用個数 (Q’TY) を示しています。の目的で部品の一部が変更になった場合，訂番が変わることがあります。これらの変更については，技術情報 (Service Information) で随時連絡されますので，常にこれらの情報も注意深く読むよう心がけてください。 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 135 Number is changed of the part is modified. third column shows the used quantities. Information regarding such changes will be provided by Service Information Bulletins. These Bulletins should be read carefully. COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 136 ASSEMBLY LOCATION DIAGRAM-1 FIGURE A-1 主要部品配置図－１ EXTERNAL COVERS ELECTRICAL COMPONENTS ASSEMBLY UPPER UNIT READING UNIT, UPPER/LOWER LOWER UNIT-1~3 400~420 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 138 ILLUSTRATION INDEX FIGURE B イラスト索引 FIGURE 100 FIGURE 200 FIGURE 300 FIGURE 400 FIGURE 410 FIGURE 420 FIGURE 500 FIGURE 600 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 141 COVER, LEFT ヒダリカバークミタテ MG1-3705-000 TRAY, PICKUP キュウシトレイクミタテ MA2-7391-000 GUIDE, DOCUMENT, EXTENSION R エンチョウガイドＲ MA2-7392-000 GUIDE, DOCUMENT, EXTENSION L エンチョウガイドＬ 100-2 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 143 GEAR, G25 ギア MS1-2500-000 SPRING, COMPRESSION ジュウドウコロバネレジスト MA2-6476-000 ROLLER, FOLLOWER ジュウドウローラ MA2-7248-000 SHAFT, FOLLOWER ジュウドウコロジク MS1-2502-000 SPRING, COMPRESSION ジュウドウコロバネハイシ１ 200-2 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 145 HOLDER, READING LOWER ヨミトリホルダーシタ MH2-5324-000 CABLE, FFC, CIS BACK ＣＩＳウラメンＦＦＣ MA2-7263-000 ARM, READING LOWER ヨミトリシタイドウアーム MA2-7264-000 SPRING, TORSION トーションバネヨミトリシタ 300-2 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 147 MOTOR, STEPPING, CARRY ハンソウモータ MF1-4322-000 PLATE, MOTOR モータプレート XB1-2300-405 SCREW, BH M3x4 バインドネジＭ３Ｌ４ XB4-7300-605 SCREW, TAP, BH M3x6 ＢタイトネジＭ３Ｌ６ 400-2 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 149 MG1-3710-000 CLUTCH, READING ヨミトリイドウクラッチ MA2-7321-000 ROLLER, EJECT 1 ハイシローラ１ MA2-7307-000 SUPPORT, EJECT ROLLER 1 ハイシローラ１ジクウケ MA2-7320-000 ROLLER, REGISTRATION レジストローラ 410-2 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 151 SHAFT, RETARD, DRIVE 1 リタードローラクドウジク１ MA2-7265-000 LEVER, REGISTRATION レジストケンチレバー MA2-7266-000 PLATE, REGISTRATION レジストケンチレバーバネ MA2-7279-000 COVER, DUST 2 ボウジンカバー２ 420-2 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 153 MG1-3607-040 ADAPTOR, AC, 100-240V ＡＣアダプタ MH2-5313-000 CABLE, USB ＵＳＢケーブル XB1-2250-405 SCREW, BH M2.5x4 バインドネジＭ２．５Ｌ４ XB1-2300-405 SCREW, BH M3x4 バインドネジＭ３Ｌ４ 500-2 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 155 STOPPER, CABLE タバセンドメ X71-9773-000 WASHER, WAVE ナミワッシャ XB1-2300-609 SCREW, BH M3x6 バインドネジＭ３Ｌ６ XB4-7400-809 SCREW, TAP, BH M4x8 ＢタイトネジＭ４Ｌ８ 600-2 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 156 MA2-7297-000 200-06 MF1-4324-000 400-13 MS1-2502-000 200-18 MA2-7298-000 400-06 MF1-4326-000 300-08 MS1-2503-000 600-13 MA2-7299-000 200-04 MF1-4327-000 300-06 MS1-3198-000 400-11 MA2-7301-000 200-11 MF1-4330-000 500-05 MS1-3200-000 600-18 MA2-7302-000 420-02 MF1-4331-000 600-27 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 157 WT3-5085-000 500-11 WT3-5118-000 500-08 X71-9773-000 600-33 XB1-2250-405 500-50 XB1-2300-405 400-50 500-51 ↓ XB1-2300-609 600-50 XB4-7300-605 400-51 XB4-7400-809 600-51 XF2-1105-040 600-19 XF2-1145-540 600-17 XF2-1606-740 400-12 XG9-0567-000 420-07 XG9-0568-000 410-05 COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 159 品質保証部品質推進課 2005年 4月第１版発行 Prepared by QUALITY ASSURANCE CENTER CANON ELECTRONICS INC. 3-17-7 Shibaura, Minato-ku, Tokyo 108-0023, Japan FIRST EDITION (APR. 2005) COPYRIGHT © 2005 CANON ELECTRONICS INC. CANON DR-2580C FIRST EDTION APR. 2005...
Page 160 0405TG...
Page 161 Scanner. To ensure that you get the most out of the scanner unit, be sure to read these instruc- tions before attempting to use it for the first time, and keep them with the DR-2580C Startup Manual in a safe place for future reference.
Page 162 • Before moving the DR-2580C with the scanner unit attached, always disconnect the interface cable connected to the DR-2580C and the AC adaptor first. Moving the DR- 2580C with cables attached might cause damage to the plugs and connectors due to excessive force applied to them during movement.
Page 163: Specifications
Supplied from DR-2580C (*) Because the scanning sensor and light source differ from the scanning sensor (CIS) and light source (LED) of the DR-2580C main unit, tones of scanned images may differ slightly. Specifications are subject to change without notice.
Page 164: Installing The Dr-2580C
Lock The scanner mechanism inside the scanner unit is locked to avoid movement during transport. Before setting the DR-2580C on the scanner unit, be sure to unlock the scanning unit slide lock. CAUTION • Turning the power ON without unlocking the scanning unit slide lock might result in malfunction of the scanner unit.
Page 165: Locking The Scanner
Locking the Scanner Locking Hooks Check to make sure that the DR-2580C is not loose, and that the hooks on the left and right of the scanner unit secure the DR-2580C in place. Check to make sure that the hooks are fully engaged.
Page 166: Removing The Dr-2580C
Such conditions might cause the scanner unit to fall and create the risk of personal injury. Removing the DR-2580C To remove the DR-2580C, first release the locking hooks, and then lift up on the back of the DR- 2580C to remove it. CAUTION Never store the scanner unit by hanging it on a wall in an upright configuration.
Page 167: Using The Flatbed
Unless the DR-2580C is correctly installed, scan errors will be generated when attempt- ing to scan, and scanning from the Flatbed scanner and the DR-2580C will not be possible. Make sure the DR-2580C is correctly installed before starting to scan.
Page 168: Cleaning
Extend the auxiliary paper support plate on the back of the scanner unit when performing Straight Path scanning with the DR-2580C. Pulling out the auxiliary paper support plate when cards and other originals are output during Straight Path scanning will keep the output documents from falling from the scanner unit.
Page 169 Document Scanner Startup Manual Please read this manual before operating this unit. After you finish reading this manual, store it in a safe place for future reference.
Page 170 • Other product and company names here in may be the trademarks of their respective owners. Copyright Copyright 2005 by CANON ELECTRONICS INC. All rights reserved. No part of this publication may be reproduced or transmitted, in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system without the prior written permission of CANON ELECTRONICS INC.
Page 171: Manuals For The Scanner
Manuals for the Scanner The DR-2580C scanner has a Startup Manual (this manual) and online help. Please refer to the Startup Manual regarding the handling of the scanner, such as installation of software and setting up the scanner.
Page 172 Conventions This manual uses the following symbols and indications. Before you start reading this manual, read the following and familiarize yourself with their meanings. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. In order to use the machine safely, always pay attention to these warnings.
Page 173 Power ..........................5 Moving the Scanner ......................5 Normal Handling ......................6 Disposal ........................... 7 Features of the DR-2580C ..................... 8 Checking the Packing List ................... 10 Removing the Protective Packing Materials ..............12 Names and Functions of Parts ..................15 Installing the Scanner ....................
Page 174: Before Using The Scanner
Before Using the Scanner Safe Operation In order to ensure safe operation, be certain to read the cautions described below. Installation Location The performance of this scanner is affected by the environment in which it is installed. Make sure that the location where the scanner is installed meets the following environmental requirements: •...
Page 175: Power
Model: MG1-3607 • If you have any questions about the AC adapter, contact your local authorized Canon dealer or service representative for futher information. Moving the Scanner • When moving the scanner, always hold it with both hands to avoid dropping it.
Page 176: Normal Handling
• Do not drop, kick, or otherwise strike the scanner. If the scanner does somehow become damaged, immediately turn the scanner OFF and unplug the Power Cord. Contact your local authorized Canon dealer or service representative to have the scanner serviced.
Page 177: Disposal
If such foreign matter does get inside of the scanner, unplug the Power Cord immediately, and then contact your local authorized Canon dealer or service representative for assistance. • Do not set up the scanner in a dusty or humid location. Doing so creates a risk of fire or electrical shock.
Page 178: Features Of The Dr-2580C
■ USB 2.0 Interface Connecting to a computer is done with Hi-Speed USB 2.0 protocol. ■ Waiting Time Is “0” The DR-2580C is ready to scan after the power is turned ON without a waiting time. ■ Color/Grayscale Support Documents can be scanned in 24-bit color or 256-level grayscale.
Page 179: Dropout Color
(save, print, mail attachment). (See p. 58.) ■ Flatbed Scanner Unit (Option) The Flatbed Scanner Unit can be attached to and used with the DR-2580C scanner. Contact your local authorized Canon dealer for more detailed information. (See p. 59.) ■...
Page 180: Checking The Packing List
Checking the Packing List The contents of the carton in which this scanner is shipped are described below. If anything is missing or damaged, contact your local authorized Canon dealer or service representative. DR-2580C Roller Unit Retard Roller Scanner Power Cord...
Page 181 • Remove all of the protective tape and protective sheets from the DR-2580C. (Refer to “Removing the Protective Packing Materials” page 12.) • To use the “roller unit” and the “retard roller” install them to the DR-2580C. Refer to “Removing and Attaching the Roller Unit” (see p. 67.) and “Removing and Attaching the Retard Roller”...
Page 182: Removing The Protective Packing Materials
Removing the Protective Packing Materials Remove all of the protective packing materials before using the scanner. Remove the protective tape (indicated by the ▼ ) from the scanner. Document Eject Tray Extension IMPORTANT When peeling off the protective tape fastening the Document Eject Tray Extension, hold the Document Eject Tray Extension firmly in place with your hand.
Page 183 Open the Document Feed Tray towards you. Document Feed Tray Pressing the OPEN knob from both sides, raise the Upper Unit. Upper Unit Remove the protective tape (indicated by ▼ ) and protective sheet. Before Using the Scanner...
Page 184 Close the Upper Unit slowly. IMPORTANT Do not force the Upper Unit to close. Doing so can damage the scanner. Be sure that the Upper Unit is completely closed by pushing on both edges with both hands until you hear a click. Close the Document Feed Tray.
Page 185: Names And Functions Of Parts
Names and Functions of Parts This section explains the name and function of each part. Familiarize yourself with the parts before connecting the scanner. ■ Front Job Buttons These buttons can be assigned functions using the Job Registration Tool. (See p. 38.) Feed Selection Lever Use it to change the way the documents are fed.
Page 186 ■ Rear Job Label Location Location for affixing job labels that describe what is assigned to the Job buttons. (See p. 39.) Document Eject Opening Document ejected from here when the straight path is being used. (See p. 49.) Kensington Slot Used for anti-theft Eject Selection Lever measures.
Page 187: Installing The Scanner
• ISIS compatible or TWAIN compatible application software that runs on your operating system IMPORTANT • Use the most recently available USB 2.0 driver when using the DR-2580C. Contact your local authorized Canon dealer or service representative for more detailed information.
Page 188 • The ISIS/TWAIN driver provided with the scanner is not necessarily compatible with all ISIS compatible or TWAIN compatible application software. For details, contact your local authorized Canon dealer or service representative. Installing the Scanner...
Page 189: Installation Procedure
Installation Procedure The procedure for installing the scanner is outlined below. (For a detailed outline of this procedure, see “Connecting the Scanner to Your PC,” on p. 22.) 1. Check the interface card in your computer. (See “Interface Cards,” on p. 20.) 2.
Page 190: Interface Cards
Interface Cards The recommended USB 2.0 interface card for this machine is noted below. Recommended USB 2.0 Interface Cards (for PCI Bus) Manufacturer: Adaptec Models: USB 2 connect 2000LP (AUA-2000) USB 2 connect 3100 (AUA-3100LP) USB 2 connect 5100 (AUA-5100) (for Card Bus) Manufacturer: Adaptec...
Page 191: Connecting The Power Cord
Connecting the Power Cord Perform the following steps to connect the Power Cord. WARNING • Be sure to use the Power Cord and AC adaptor provided with the scanner. • Be sure the scanner is turned OFF when performing this operation.
Page 192: Connecting The Scanner To Your Pc
• When the application is running, do not turn the scanner OFF or unplug the interface cable. • Do not connect multiple DR-2580C scanners to one (1) computer. USB Interface Connection • Be sure to use the USB cable bundled with the scanner or a Hi-Speed USB 2.0 compatible cable.
Page 193: Turning The Power On/Off
ON, immediately turn the scanner OFF and unplug the Power Cord. Contact your local authorized Canon dealer or service representative to have the scanner serviced. Log on to Windows.
Page 194: Recognizing The Scanner
Recognizing the Scanner When the computer recognizes the scanner, Windows Plug And Play displays the scanner driver's installation screen. Follow the instructions that appear on the screen to install the driver. • If you are using Windows 98SE, the [Add New Hardware Wizard] dialog box appears.
Page 195 5. Click the [Finish] button on the Completing the Found New Hardware Wizard screen. Note The DR-2580C is registered as “CANON DR-2580C USB” in the Imaging Device directory. IMPORTANT The job function will no longer be available if scanner recognition is cancelled part way through (see “Job Function,”...
Page 196: Turning The Power Off
ON, immediately turn the scanner OFF and unplug the Power Cord. Contact your local authorized Canon dealer or service representative to have the scanner serviced. Installing the Scanner...
Page 197: Installing The Software
Installing the Software IMPORTANT The DR-2580C setup disc contains the software listed below. Be sure to read the contents of the Readme.txt file before installing the software. • ISIS/TWAIN Driver This driver allows this scanner to be used with ISIS compatible application software or TWAIN compatible application software.
Page 198: Installing The Isis/Twain Driver
Installing the ISIS/TWAIN Driver The ISIS/TWAIN driver setup program installs the ISIS/TWAIN driver and the job tool. Follow the procedure below to install the ISIS/TWAIN driver. Turn ON your PC. Windows starts. IMPORTANT • If you are using Windows 2000 Professional or Windows XP, be sure to log on as a user with administrator privileges.
Page 199 Follow the instructions that appear on the screen to install the software. 1. Read the Welcome text, and then click [Next]. 2. Read the License Agreement text, and then click [Yes]. 3. Start installation of the ISIS/TWAIN driver. Installing the Software...
Page 200 After installation is complete, click the [Finish] button to exit the installer. Note When the ISIS/TWAIN driver is installed, Canon DR-2580C Help (see “Using the ISIS/TWAIN Driver” on p. 37.) and the Job Registration Tool (see “Using Job Tools” on p. 38.) icons are registered to the Start menu.
Page 201: Installing Captureperfect
Installing CapturePerfect CapturePerfect is ISIS compatible application software. You need to install the ISIS/TWAIN driver before installing CapturePerfect. Follow the procedure below to install CompturePerfect. Turn ON your PC. Windows starts. IMPORTANT If you are using Windows 2000 Professional or Windows XP, be sure to log on as a user with administrator privileges.
Page 202 Follow the instructions that appear on the screen to install the software. 1. Select the installation language. 2. Read the Welcome text, and then click [Next]. 3. Read the License Agreement text, and then click [Yes]. 4. Read the Choose Destination Location text, and then click [Next]. Installing the Software...
Page 203 5. This starts the installer. 6. This completes the installation. After installation is complete, click the [Finish] button to exit the installer. Note Installing CapturePerfect will put a CapturePerfect icon on your Windows Start Menu. (See “Using CapturePerfect,” on p. 40.) Installing the Software...
Page 204: Uninstalling Software
Uninstalling Software Follow the procedure described below to uninstall the ISIS/TWAIN driver, Job Tools, and CapturePerfect. IMPORTANT Uninstall the ISIS/TWAIN driver and job tool separately. Click the [Start] button, point to [Settings], and then click [Control Panel]. Note If you are using Windows XP, on the Start menu, click [Control Panel]. The [Control Panel] window is displayed.
Page 205 The [Add/Remove Programs Properties] dialog box is displayed. Note If you are using Windows XP, the [Add or Remove Programs] dialog box is displayed. On the list in the dialog box, select the application you want to delete, and then click [Add/Remove]. Note If you are using Windows XP, click the [Change/Remove] button.
Page 206 The [Confirm File Deletion] dialog box appears. When [Canon DR-2580C Driver] is selected. When [DR-2580C Job Tool] is selected. When [CapturePerfect] is selected. Click the [Yes] button to start the uninstaller. After uninstall is complete, click the [OK] button to exit the uninstaller.
Page 207: Using The Software
To access ISIS/TWAIN driver help, click the [Start] button, point to [Programs] (when using Windows XP, point to [All Programs]) - [Canon DR-2580C], and then click [Canon DR-2580C Help], or click the [Help] button displayed in the dialog box. Note Before using the ISIS/TWAIN Driver, select the scanner [Canon DR-2580C] with the software.
Page 208: Using Job Tools
Turn ON the scanner. Turn ON your computer. Windows starts. Click the [Start] button, point to [Programs] (when using Windows XP, point to [All Programs]) - [Canon DR-2580C], and then click [Job Registration Tool]. Job Registration Tool starts. Using the Software...
Page 209 Press a Job button, and then configure the Job Registration Tool settings. Note For details about configuring Job Registration Tool settings, click the [Help] button. After configuring the settings, click the [Close] button to exit Job Registration Tool. Note Fill in the Job Registration Tool settings on the included job label, and affix the job label to the scanner.
Page 210: Using Captureperfect
Using CapturePerfect This section explains the basic procedures to start and exit CapturePerfect. Details about actually using CapturePerfect can be found in CapturePerfect help. To view information about using CapturePerfect, click [Help] on the CapturePerfect menu bar. Starting CapturePerfect Turn ON the scanner. Turn ON your computer.
Page 211 On the [Scan] menu, click [Select Scanner]. Select [Canon DR-2580C], and then click the [OK] button. Note If [Canon DR-2580C] is not displayed in the list of scanners, reinstall the ISIS/TWAIN driver. (See “Installing the ISIS/TWAIN Driver,” on p. 28.) Using the Software...
Page 212 On the [Scan] menu, click [Scanner Setting], and then configure the scanning parameters. Note For details about how to configure scanning parameters, see ISIS/TWAIN driver help. (See p. 37.) Execute the scan operation from the [Scan] menu. Note Details about actually using CapturePerfect can be found in CapturePerfect help.
Page 213: Using The Scanner
Using the Scanner Documents This scanner can scan documents ranging in size from business cards and checks to A4 size documents. The size of documents that can be scanned is shown below. Eject Direction (*1) U-Turn Path Straight Path Width 53 mm to 216 mm 53 mm to 216 mm Length...
Page 214 • Scanning documents that are written in pencil or similar material can make the rollers dirty, which can then transfer the dirt to subsequent documents. Always clean the rollers after scanning a document written in pencil. • When scanning a two-sided document that is printed on thin paper, the image on the opposite side of each page may show through.
Page 215: Preparing The Trays
Preparing the Trays Prepare the Document Feed Tray and Document Eject Tray according to the paper size and feed/eject method. Setting Up the Document Feed Tray Pull the Document Feed Tray towards you to open it. When Documents Are Skewed If fed documents are skewed, follow the procedure described below to install the Document Guide Adapters.
Page 216 Set the Document Guide Adapters onto the Document Guides. Note Cover the Document Guides from above with the Document Guide Adapters, and insert them as far as they will go, until they click into place. Carefully close the Upper Unit. IMPORTANT Do not force the Upper Unit to close.
Page 217: Document Eject Tray
IMPORTANT • Do not hold the tips of the Document Guide Adaptors when moving them. Doing so can damage the document tray. • Before removing the Document Guide Adapters, be sure to open the upper unit first. Using undue force when removing the Document Guide Adaptors can damage the document tray.
Page 218 Using the U-Turn Path Lower the Eject Selection Lever. Scanned documents will be ejected to the Document Eject Tray. Pull the Document Eject Tray Extension towards you to open it. IMPORTANT • Be careful when opening the Document Eject Tray Extension. Forcing it open can damage it.
Page 219 Using the Straight Path Raise the Eject Selection Lever. Scanned documents will be ejected to the back of the scanner. Note When using the Straight Path, the ejected documents are stacked in reverse order to how they were fed. IMPORTANT •...
Page 220: Placing A Document For Scanning
Placing a Document for Scanning There are two methods for paper separation, called the Page Separation mode and Bypass mode for feeding documents. Feeding documents continuously from a stack of documents placed in the feed tray is called the Page Separation mode.
Page 221 Straighten the edges of the stack of documents to be scanned. CAUTION • Do not place the documents on top of the scanner to align them. Doing so may cause a malfunction. • Be careful when placing a document in the scanner. It is possible to cut your hand on the edge of a sheet of paper.
Page 222 Place the documents face up into the feed tray, so that they touch the stoppers. Stopper IMPORTANT There is a load limit mark ( ) on the Document Guides. Do not stack documents higher than this mark (approximately 50 sheets of 80g/m paper.
Page 223: How To Feed With The Bypass Mode
Note • If the paper feed operation stops due to a system error or a paper jam while the scanner is scanning, resolve the problem, make sure that the scanned image of the last page that was fed has been stored, and then resume the scanning operation.
Page 224 The document is pushed against the document feed slot and is fed into the scanner. IMPORTANT • When scanning documents that are fastened together, such as invoices, set the edge that is fastened together as the leading edge. • Note that when scanning with nonseparated feed, if you place several documents that are not fastened together on the feed tray at one time, they will be fed together.
Page 225: Clearing A Paper Jam
Clearing a Paper Jam When paper jams occur during scanning, use the following procedure to clear them. CAUTION Be careful when removing jammed paper. It is possible to cut your hand on the edge of a sheet of paper. Remove any documents that have been left in the eject tray. Close the Document Eject Tray Extension.
Page 226 Pressing the OPEN Knob from both sides, raise the Upper Unit. Remove the jammed document. IMPORTANT Be sure to pull the document out carefully, without applying too much force. Should the document tear, be sure to remove any part remaining in the scanner.
Page 227 Be sure that the upper unit is completely closed by pushing on both edges with both hands until you hear a click. Press on both sides of the back cover to close it. IMPORTANT Be sure to press on both sides of the upper unit and back cover to ensure that they are securely closed.
Page 228: Other Functions
See Job Registration Tool help for details about how to use it. (See “Using Job Tools,” on p. 38.) Scan to Save Scan to Print Scan to E-Mail Saves to a specific folder. Sends to a printer. Attaches to an e-mail message. (Mail Server) (Network) DR-2580C Using the Scanner...
Page 229 Flatbed Scanner Unit (Option) An optional flatbed scanner unit is available for the DR-2580C as an option. The flatbed scanner unit can be used to scan thick documents, books, and other originals that cannot pass through the feeder.
Page 230: Regular Maintenance
Regular Maintenance Clean the scanner on a regular basis as described below to maintain peak scanning quality. CAUTION • When cleaning the scanner or inside of the scanner, turn OFF the power switch and unplug the Power Cord from the outlet. •...
Page 231: Cleaning The Sensor Glass, Shading Boards, And The Rollers
Cleaning the Sensor Glass, Shading Boards, and the Rollers If scanned images have extraneous marks, or if the scanned documents are dirty, then the sensor glass or rollers inside the scanner may be dirty. Clean them periodically. Pressing the OPEN Knob from both sides, raise the Upper Unit. Note •...
Page 232 Scratches on the sensor glass may cause marks on the images and could cause feeding errors. If there are scratches on the sensor glass, contact your local authorized Canon dealer or service representative. Use a commercially available cotton swab to clean off any dirt from the shading boards at the front and back of the sensor glasses.
Page 233 Wipe the removed rollers with a firmly wrung cloth moistened with water. Attach the rollers that were removed. (See “Removing and Attaching the Roller Unit,” on p. 67.) Close the Upper Unit slowly. IMPORTANT Do not force the Upper Unit to close. Doing so may damage the scanner. Be sure that the Upper Unit is completely closed by pushing on both edges with both hands until you hear a click.
Page 234: Removing And Attaching The Rollers
• Be sure to reset the counter after replacing the rollers. (See “Resetting the Counter,” on p. 65.) • Contact your local authrized Canon dealer or service representative for information about the exchange roller kit (roller unit and retard roller).
Page 235: Resetting The Counter
Resetting the Counter After replacing the feed rollers, reset the counter according to the following procedure. Click the [Start] button, point to [Settings], and then click [Control Panel]. Note If you are using Windows XP, on the Start menu, click [Control Panel]. The [Control Panel] window is displayed.
Page 236 Click on [Properties] for the scanner you are using. Click the [Counter] tab. Press the [Reset] button, and then make sure that the counter for the roller being used is set to 0. Regular Maintenance...
Page 237: Removing And Attaching The Roller Unit
Removing and Attaching the Roller Unit Follow the procedure below to remove and attach the roller unit for cleaning or replacement. Note When attaching the Roller Unit during installation, operate the roller fastening lever according to the removal procedure and then attach the Roller Unit. CAUTION Do not use excessive force when removing or attaching the rollers.
Page 238 Supporting the roller unit with your hand, slide the roller lock lever to the right. Lower the roller unit. First detach the right side of the roller unit (q), and then remove the roller unit (w). Regular Maintenance...
Page 239 Attaching the Roller Unit Set the roller unit onto the scanner's shaft. Insert the protrusion of the roller unit into the groove in the scanner, and then lift the roller unit. Slide the roller lock lever to the left. Regular Maintenance...
Page 240 Push the roller lock lever towards the back of the scanner to lock the roller unit in place. Close the Upper Unit slowly. IMPORTANT Do not force the Upper Unit to close. Doing so may damage the scanner. Be sure that the Upper Unit is completely closed by pushing on both edges with both hands until you hear a click.
Page 241: Removing And Attaching The Retard Roller
Removing and Attaching the Retard Roller Follow the procedure below to remove and attach the retard roller for cleaning or replacement. Note When attaching the Retard Roller during installation, operate the roller fastening lever according to the removal procedure and then attach the Roller Unit.
Page 242 Move the roller lock lever upward (q), and then slide it to the right (w). Shift the retard roller to the right to remove it. Attaching the Retard Roller Position the retard roller so the notch in the roller is facing the scanner's shaft. Regular Maintenance...
Page 243 Slide the roller lock lever to the left, and insert it into the retard roller hole. Push the roller lock lever towards the back of the scanner to lock the retard roller in place. Attach the roller cover. Regular Maintenance...
Page 244 Close the Upper Unit slowly. IMPORTANT Do not force the Upper Unit to close. Doing so may damage the scanner. Be sure that the Upper Unit is completely closed by pushing on both edges with both hands until you hear a click. Regular Maintenance...
Page 245: Troubleshooting
The Flatbed Scanner (Option) Does Not Work ......p. 79 If after consulting the above section you still cannot resolve the problem, contact your local authorized Canon dealer or your service representative. The Scanner Does Not Turn ON Check the following: •...
Page 246: The Pc Does Not Recognize The Scanner
The PC Does Not Recognize the Scanner The following are possible causes of the PC failing to recognize the scanner. Check each possible cause. Cause The scanner is not connected correctly. Remedy Check the USB cable connections between the scanner and the PC.
Page 247: Images Are Not Scanned
• When using the flatbed scanner unit (option), make sure that the flatbed scanner unit is correctly attached to the DR-2580C before scanning. Scanning cannot be done if the flatbed scanner unit is not correctly attached to the DR-2580C.
Page 248: Resulting Scanned Images Are Not Correct
Driver,” on p. 28. For details on how to install the application software, refer to the application software instruction manual. Cause Attempting to use a function of the DR-2580C that is not supported by the application software. Remedy Some application software may not support certain functions, such as automatically detecting the paper size or changing the scanning mode/resolution through the scan panel.
Page 249: The Flatbed Scanner (Option) Does Not Work
ISIS/TWAIN Driver for information about the ISIS/TWAIN Driver settings. Cause The interface connector is not connected. Remedy Check the connections between the DR-2580C and the flatbed scanner unit. Cause The DR-2580C is not installed correctly. Remedy Check the document size, thickness, and paper type. Remove the DR-2580C scanner and then reinstall it correctly.
Page 250: Specifications
Specifications Type Desktop sheetfed scanner Scanning Document Specifications Width: 53 mm to 216 mm Length: 70 mm to 355.5 mm Weight: Using the U-Turn Path (separated documents) 52 to 128 g/m (0.06 mm to 0.15 mm) (nonseparated documents) 42 to 157 g/m (0.05 mm to 0.2 mm) Weight: Using the Straight Path (separated documents)
Page 251 24-bit Color Simplex 200 x 200 dpi 13 pages/minute 300 x 300 dpi 8 pages/minute 600 x 600 dpi 2 pages/minute Duplex 200 x 200 dpi 26 images/minute 300 x 300 dpi 16 images/minute 600 x 600 dpi 4 images/minute Amount of paper that can be 5 mm stack, maximum stacked in automatic feeder...
Page 252: Replacement Parts
Flatbed Scanner Unit for the DR-2580C scanner. Bar code module (product code: 0434B003) Additional software to allow the ISIS/TWAIN driver to recognize bar codes. • Contact your local authorizde Canon dealer or service representative for detailed information about the options. Replacement Parts Roller replacement kit (product code: 0106B002) Kit to replace the feed rollers (roller unit and retard roller).
Page 253 External Dimensions Units: millimeters (Document Eject Tray Extension2 is open) (Document Eject Tray Extension is open) Specifications...
Page 254: Index
Index AC adapter ..........5 Kensington Slot ........16 CaptuerPerfect Names of Parts .......... 15 Install ............ 31 Notes Concerning Disposal ......7 Uninstall ..........34 Notes on Normal Handling ......6 Using ............ 40 Checking the Packing List ......10 OPEN Knob ..........

Canon DR-2580C Service Manual

Table of Contents

Functions & Operation

Flatbed Scanner Unit for Dr-2580C Instructions

Table of Contents

Quick Links

Chapters

Troubleshooting

Related Manuals for Canon DR-2580C

Summary of Contents for Canon DR-2580C

Table of Contents