Installing The Isis/Twain Driver - Canon DR-2580C Service Manual

Installing the ISIS/TWAIN Driver

The ISIS/TWAIN driver setup program installs the ISIS/TWAIN driver and
the job tool. Follow the procedure below to install the ISIS/TWAIN driver.
1
Turn ON your PC. Windows starts.
IMPORTANT
• If you are using Windows 2000 Professional or Windows XP, be sure to
log on as a user with administrator privileges.
• If another ISIS compatible driver is already installed in your PC, you must
back up the files listed below. These files may be overwritten when you
install this ISIS/TWAIN driver.
C:\Windows\System\pix*.dll
C:\Windows\PixTran\*.*
• The name of the "\Windows" and "\Windows\System" folder varies,
depending on which version of Windows you are using. Substitute the
above folder names with the relevant folder names for Windows used in
your system.
2
Insert the setup disc in the PC's CD-ROM drive.
3
Click the [Start] button, and then select [Run].
The [Run] dialog box appears.
4
In the Open box, enter "D:\Driver\Setup.exe" (assuming that "D" is the letter
assigned to your CD-ROM drive), and then click the [OK] button.
The installer starts.
28
Installing the Software