Canon DR-2580C Service Manual page 22

CHAPTER 1 GENERAL DESCRIPTION
Reinstallation
•
1) Push the OPEN knob from both sides and
open the upper unit slowly.
2) Raise the roller locking lever and slide it to
the right.
3) Set the roller unit on the shaft of the main
body.
Figure 1-607
4) Insert the projection on the roller unit into
the groove in the main body and lift the
roller unit.
Figure 1-608
1-14
5) Slide the roller locking lever to the left and
then push it backward to secure the roller
unit.
c. Retard roller
Removal
•
1) Push the OPEN knob from both sides and
open the upper unit slowly.
COPYRIGHT © 2005 CANON ELECTRONICS INC.
Figure 1-609
Figure 1-610
CANON DR-2580C FIRST EDITION APR. 2005