Left Cover - Canon DR-2580C Service Manual

CHAPTER 3 DISASSEMBLY/ASSEMBLY
2. Right Cover
1) Remove the rear cover and fully open the
pickup tray and upper unit.
2) Unhook the 5 fitting parts 1 (one of them
on the back side) and remove the right
cover 2 . At this time, the pickup tray 3
also comes off.
Figure 3-102
* Notes on assembly
Do not pinch the cable. In case that the
power switching lever comes off, be sure
to put it back.
3-2

3. Left Cover

1) Remove the rear cover and fully open the
pickup tray and upper unit.
2) Unhook the 4 fitting parts 1 (one of them
on the back side) and remove the left
cover 2 . At this time, the pickup tray 3
also comes off.
* Notes on assembly
Set the rear fitting parts and the edge of
the eject selection lever in the mounting
positions indicated on the main frame.
COPYRIGHT © 2005 CANON ELECTRONICS INC.
Figure 3-103
CANON DR-2580C FIRST EDITION APR. 2005