Canon DR-2580C Service Manual page 109

4) The adjustment starts automatically. The
progress screen appears on the display.
An example of display is shown below.
Figure 5-205
COPYRIGHT © 2005 CANON ELECTRONICS INC.
5)
•
CANON DR-2580C FIRST EDITION APR. 2005
CHAPTER 5 TROUBLESHOOTING
When the adjustment is finished, the
progress screen disappears and the ser-
vice screen appears.
It takes approx. 10 seconds to finish.
Errors
If an adjustment value failure occurs in the
while executing this mode, an error screen
is displayed, and adjustment is interrupted.
If an error screen is displayed, select [OK]
in the screen to stop adjustment. Then
after checking the operating procedure,
perform adjustment again. If adjustment is
interrupted, the adjustment value remains
the value prior to adjustment.
Sample error screens are shown below.
Figure 5-206
5-5