Installing The Spinner - Seagull Models SEA EAGLE Instruction Manual

www.seagullmodels.com
M3x12mm.
Electric motor.
4mm.
Epoxy.
110mm.
5) Attach the speed control to the side of the
motor box using two-sided tape and tie wraps.
Connect the appropriate leads from the speed
control to the motor. Make sure the leads will
not interfere with the operation of the motor.
4mm.
Speed control.
Battery.
Balsa stick.

INSTALLING THE SPINNER.

Install the spinner backplate, propeller and
spinner cone.
Epoxy.
Blind nut.
13