Jacobsen HR5111 Service And Repair Instructions page 79

(See Figure 6C-4)
9. Place steering unit on its side. Keeping cross pin
horizontal, carefully push sleeve (14) from steer-
ing unit housing.
Figure 6C-4.
SECTION 6C. STEERING UNIT
(See Figure 6C-5)
10. Remove O-ring (22), kin ring (21), thrust bearing
11. Push cross pin (15) out of sleeve (16).
12. Carefully push spool (17) from sleeve (16).
13. Push neutral positioning springs from spool (17).
Figure 6C-5.
6C-3
and washers (20), ring (19) and dust ring (23).
STEERING
6C