SECTION 12C. GENERAL INSTRUCTIONS
PREPARATION FOR REPAIR
Thoroughly clean decks prior to removal, disassembly
and/or repair. Coat bare metal parts with light oil to
prevent rust and corrosion.
Decks are exposed to water, grass clippings, sand,
corrosive fertilizers, and foreign objects. It may be
necessary to use bearing pullers and/or wooden blocks
and hammer to free up some parts.
When such force is required to remove parts, those
parts should be replaced rather than reinstalled on the
machine.
Before removing components or performing re-
pairs and adjustments, lower attachment, stop
engine, set parking brake and remove key from
ignition switch.
Figure 12C-1. Mowers
12C-1
ATTACHMENTS
WARNING
12C