Page 1
1 - I N C L U D E S I T E M S 3 - 1 6 Parts & Maintenance Manual ™ HR-9016 Turbo Rotary Mower 70528 - Kubota V3300-DI-E2B, 4WD 70529 - Kubota V3300-DI-E2B, 4WD with ROPS 70530 - Kubota V3300-DI-E2B, 4WD EC...
“All rights reserved, including the right to reproduce this material or portions thereof in any form.” All information in this publication is based on information available at time of approval for printing. Jacobsen reserves the right to make changes at any time without notice and without incurring any obligation.
Suggested Stocking Guide To Keep your Equipment fully operational and productive, maintain a stock of the more commonly used maintenance items. We have included part numbers for additional support materials and training aids. A more complete listing of accessories and attachments can be found in the Specifications Section Service Parts Qty.
Only use accessories and attachments 19. Local regulations may restrict the age of the operator. approved by Jacobsen. 20. Never use your hands to search for oil leaks. Hydraulic Stay alert for holes in the terrain and other hidden fluid under pressure can penetrate the skin and cause hazards.
Adjustments and maintenance should always be performed by a qualified technician. If additional information or service is needed, contact your Authorized Jacobsen Dealer who is kept informed of the latest methods to service this equipment and can provide prompt and efficient service. Use of other than original or...
SPECIFICATIONS SPECIFICATIONS PRODUCT IDENTIFICATION_________________________________________________ 70528......HR 9016 Turbo, 4 Wheel Drive 70529......HR 9016 Turbo, 4 Wheel Drive ® with ROPS A Textron Company 70530......HR 9016 Turbo, 4 Wheel Drive EC CHARLOTTE, NC MADE IN U.S.A. 70528 1601 Serial Number ....An identification plate, like the one...
Contact your area Jacobsen Dealer for a complete listing of accessories and attachments. CAUTION Use of other than Jacobsen authorized parts and accessories may cause personal injury or damage to the equipment and will void the warranty. Air Blow Gun ............JAC5098 Carefree Tire Kit ............2811453...
ADJUSTMENTS ADJUSTMENTS GENERAL________________________________________________________________ adjustment cannot be made, contact an authorized WARNING Jacobsen Dealer. 2. Replace, adjust, worn damaged To prevent injury, lower implements to the ground, components. disengage all drives, engage parking brake, stop engine and remove key from ignition switch before 3.
ADJUSTMENTS SERVICING FRONT DECK___________________________________________________ The front deck can be raised and tilted up to improve arms. To prevent personal injury or damage to deck access to the cutting unit and blades for service and or lift arms, DO NOT allow deck to drop from service cleaning.
ADJUSTMENTS CUTTING HEIGHT _________________________________________________________ Cutting height for decks can be adjusted from 1 to 5-1/2 in. (25-125 mm) in 1/2 in. (13 mm) increments. Actual Mount No. of Spacers Mount Height Location Under Mount Middle cutting height may vary somewhat from the heights given 1 1/2 Lower Upper...
ADJUSTMENTS PARKING BRAKE _________________________________________________________ The brake switch is part of the operator back-up system 4. When properly installed the switch will be closed and senses when the parking brake is engaged. If this when the parking brake is engaged and open when switch fails the machine may not start and the operator the brake is disengaged.
ADJUSTMENTS NEUTRAL SENSING SWITCH________________________________________________ The neutral sensing switch is part of the operator backup system. It is designed to prevent the tractor from starting unless the traction pedal is in neutral. If this switch fails or is out of adjustment the tractor will not start. 1.
ADJUSTMENTS 3.10 LIFT LIMIT SWITCHES _____________________________________________________ The rotation of the cutting blades is controlled by limit 3. Shut off engine and remove key. Support decks switches positioned on the tractor frame near the lift arms using blocks. This will prevent them from accidently for each deck.
ADJUSTMENTS 3.11 TRACTION PEDAL_________________________________________________________ The traction pedal must be adjusted so the pump is at full stroke when the pedal is fully depressed in the forward position. 1. Make sure return arm (K-Figure 3H) on pump is adjusted to neutral, Section 3.7. 2.
All torque values included in these charts are approximate and are for reference only. Use of these torque values is at your sole risk. Jacobsen is not responsible for any loss, claim, or damage arising from the use of these charts.
4. Use the illustrations in the Parts List as reference adjustments cannot be made, contact an Authorized for the disassembly and reassembly of components. Jacobsen Dealer. 5. Recycle or dispose of all hazardous materials 2. Inspect the equipment on a regular basis, establish...
MAINTENANCE SHARPENING BLADES _____________________________________________________ 1. Place a wooden block between the blade and mower housing to stop the blade from moving. To remove blade, turn screw holding blade counterclockwise Maximum WARNING 1/2” (13 mm) The mower blades can develop sharp edges. Use caution whenever servicing and handling.
If the injection pump, injectors or the fuel system require service, contact an authorized Jacobsen Dealer. During the break-in period, Jacobsen recommends the following: Note: The tractor is designed to operate and cut most efficiently at the preset governor setting. Do not change 1.
MAINTENANCE AIR FILTER _______________________________________________________________ Check the service indicator daily. Replace air cleaner 5. Check all hoses and air ducts. Tighten hose clamps. element immediately when red band becomes visible (A) Do not remove the element for inspection or cleaning. Unnecessary removal of the filter increases the risk of injecting dust and other impurities into the engine.
MAINTENANCE FUEL SYSTEM ____________________________________________________________ Refer to Section 4.23 for specific maintenance intervals. To change fuel filter: See Engine Manual for detailed procedures. 1. Close fuel valve on tank; then remove and discard the existing filter. Before replacing any filter, thoroughly clean the filter 2.
MAINTENANCE 4.12 CHARGING BATTERY _____________________________________________________ 2. Whenever possible, remove the battery from the WARNING tractor before charging. If battery is not sealed, check that the electrolyte covers the plates in all the Charge battery in a well ventilated area. Batteries cells.
3. After oil has drained install drain plug and fill with Drain and replace the hydraulic oil if you notice the Jacobsen Hydraulic oil. presence of water or foam in the oil, a rancid odor (indicating excessive heat), or after a major component 4.
If you have to add coolant more than once a month, or add more than one quart at a time, have a Jacobsen Dealer check the cooling system. Drain and refill annually. Remove the radiator cap, open the engine block drain and the radiator drain.
Note: Do not wash any portion of the equipment while it is Repair damaged metal surfaces and use Jacobsen touch-up hot. Do not use high pressure spray or steam. Use cold paint. Wax the equipment for maximum paint protection.
Page 25
MAINTENANCE Always check Interlock System after servicing the electrical system! K15 K16 K17 LTS 4WD CRS Wire Harness Label MR MC ML NT3 NT2 NT1 BK2 BK1 KYS KYA KYI Schematic Code Relay Description Function KYA / K2 Key Switch “A” Holds fuel stop solenoid valve open when ignition switch is in the RUN position and opera- tor is seated.
MAINTENANCE 4.19 TIRES ___________________________________________________________________ 2. Check pressure yearly. Use an accurate, low CAUTION pressure tire gauge. 3. Keep tires inflated to proper pressure Unless you have the proper training tools and experience, DO Not attempt to mount a tire on a rim. Tractor: 20-22 psi (138 -152kPa).
3. Check and retorque all hardware. All replacement components used for the ROPS must be as Do not loosen or remove bolts, do not weld, drill, modify, specified in the Jacobsen Parts List. bend or straighten a damaged structure. 4.22 STORAGE ________________________________________________________________ General 3.
** See Engine Manual Manual grease gun with NLGI Grade 2 (Service Class LB). ***Clean as Required III Engine Oil - See Section 4.5 **** Check lug bolt torque daily for first 100 hours of operation. Jacobsen Hydraulic Oil - VG ISO 68...
TROUBLESHOOTING TROUBLESHOOTING GENERAL________________________________________________________________ The troubleshooting chart below lists basic problems that may occur during start-up and operation. For more detailed information regarding the hydraulic and electrical systems contact your area Jacobsen Dealer. Symptoms Possible Causes Action Engine will not Parking brake disengaged Check operator back-up system and start-up procedure.
Page 31
PARTS LIST PARTS LIST TABLE OF CONTENTS _____________________________________________________ Body 43.1 ..Power Steering Hoses......104 1.1 ..Decals-Tractor ..........32 44.1 ..Engine Compartment Clamps ....106 2.1 ..Hood ............34 45.1 ..Wire Harness Routing ......107 3.1 ..Cowlings and Skirts ........36 Components 4.1 ..
HR-9016 Serial No. All 1.1 Decals-Tractor Body OPERATING INSTRUCTIONS READ MANUAL THOROUGHLY FOR OPERATING AND SAFETY INSTRUCTIONS. REPLACEMENT MANUAL AVAILABLE BY SENDING PRODUCT NO. TO : TEXTRON GOLF AND TURF, P.O. BOX 7708, CHARLOTTE, NC28241 CAUTION TO START TO TRANSPORT TO MOW TO STOP Premature engine shutdown may lead to per manant damage to turbocharger.
Decal, ROPS Structure Used On 70529 Only 3004287 Pad, Center Panel 3009268 Pad, Step 3009267 Pad, Floorboard 4124759 Emblem, Jacobsen 3009073 Decal, Control Panel 4137295 Decal, Instrument Panel 5002952 Decal, ROPS Seat Belt Used On 70529 Only > Change from previous revision...
Page 35
443102 Nut, 1/4-20 Hex 1004686 Latch, Flexible Draw 403914 Screw, #10-24 x 3/4” Truss Head 3009793 Spring, Gas Model 70528 and 70529 3009793 Spring, Gas (One Side Only Model 70530 2809834 Spring, Gas (One Side Only) Model 70530 Only 4136563...
HR-9016 Serial No. All 4.1 Seat Pan and Heat Shield 9016-25...
Page 39
452006 Flat Washer, 5/16 3006880 Heat Shield 400182 Screw, 5/16-18 x 5/8” Hex Head 3010013 Shield, Floor Used On 70528 and 70530 3010789 Shield, ROPS Floor Used On 70529 5003617 Seat Belt Assembly Used On 70529 Only 400370 Screw, 7/16-20 x 1” Hex Head...
HR-9016 Serial No. All 21.1 Remote Engine Oil Filter 9016-13...
Page 71
HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 450190 Screw, M8-1.25 x 16 Hex Head 4136120 Adaptor, Oil Filter Part of Engine 4137099 Adaptor, 90°, 3/8-18 x 13/16 4133242 O Ring Part of Engine 4133240 Plug, Oil Filter Part of Engine 4137101 Adaptor, 90°...
HR-9016 Serial No. All 22.1 Engine Mounting 9016-11...
Page 73
HR-9016 Item Part No. Qty. Description Serial Numbers/Notes – Engine and Pump Assembly See 22.1 4136298 Mounting Hardware Part of Engine 3008821 Temperature Sender REFERENCE U6, See 68.1 4136286 Engine Mount, Right Hand 4136285 Engine Mount, Left Hand 4132013 Engine Mount, Rear 365979 Screw, M12-1.25 x 25mm Hex Head 446154...
HR-9016 Serial No. All 23.1 Engine and Pump Assembly 9016-10...
Page 75
HR-9016 Item Part No. Qty. Description Serial Numbers/Notes Kubota Engine Assembly • Engine Oil Filter • Fan Belt • Fuel Filter 339989 Connector, Straight Thread 362263 Bolt, M10-1.25 X 25 Hex Head 363485 Lockwasher, M10 Heavy 400336 Screw, 7/16-14 X 1-1/4” Hex Head 400406 Screw, 1/2-13 X 1-1/4”...
HR-9016 Serial No. All 26.1 Pump and 4WD Valve Mounting Traction Pump 9016-06 Item Part No. Qty. Description Serial Numbers/Notes – Pump Assembly See 27.1 4135556 4WD Valve with Oil Shuttle See 56.1 400406 Screw, 1/2-13 x 1-1/4” Hex Head 446154 Lockwasher, 1/2 Heavy 453017...
HR-9016 Serial No. All 28.1 Front Lift Arms and Cylinders Lift Arms and Deck Valves 9016-09...
Page 83
HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1002785 R.H. Front Lift Arm 1003900 L.H. Front Lift Arm 342033 • Bushing 471214 • Grease Fitting 3006490 Bracket, Front Deck Pivot 3007091 Angle, R.H. Valve Mount 3007092 Angle, L.H. Valve Mount 400412 Screw, 1/2-13 x 2”...
HR-9016 Serial No. All 29.1 Front Deck Latch 9016-05...
Page 85
HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1003483 Brace, Stand Up 365826 Spacer 400430 Screw, 1/2-13 x 5-1/2” Hex Head 1003277 Pin, Cylinder Rod End 446154 Lockwasher, 1/2 Heavy 443118 Nut, 1/2-13 Hex 1003484 Latch, Front Deck 352936 • Bushing 3008472 Spring, Torsion 441690...
HR-9016 Serial No. All 30.1 Side Lift Arms 21 / 22 23 / 24 1 / 2 13 / 14 9016-28...
Page 87
HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1005016 Pivot, Left Side Arm 1005017 Pivot, Right Side Arm 304569 • Bushing 332351 • Bushing 471214 • Grease Fitting 3006294 Plate, Side Arm Pivot 3006295 Plate, Side Arm Pivot 400412 Screw, 1/2-13 x 2” Hex Head 446154 Lockwasher, 1/2 Heavy 444758...
HR-9016 Serial No. All 34.1 Side Deck Valve Supply Hydraulics and Electrical 9016-31 Item Part No. Qty. Description Serial Numbers/Notes 400264 Screw, 3/8-16 x 1-1/4” Hex Head 446142 Lockwasher, 3/8 Heavy 443110 Nut, 3/8-16 Hex 4135253 Plate, Tube Mounting 4135262 Hose, Pump to Right Side Tube 4135408 Hose, Pump to Left Side Tube...
HR-9016 Serial No. All 35.1 Front Deck Valve Supply 9016-32 Item Part No. Qty. Description Serial Numbers/Notes 400264 Screw, 3/8-16 x 1-1/4” Hex Head 452008 Flat Washer, 3/8 446142 Lockwasher, 3/8 Heavy 443110 Nut, 3/8-16 Hex 1003607 Hose, Pump to Left Front Valve 4135589 Hose, Pump to Right Front Valve 339963...
HR-9016 Serial No. All 38.1 Traction Hydraulics To Bottom Port Right Rear Wheel Motor To Top Port Right Rear Wheel Motor To Port 1 4WD Valve To Port 3 4WD Valve To Port 2 To Bottom Port 4WD Valve Left Rear Wheel Motor To Top Port Left Rear Wheel Motor To Port 4...
Page 97
HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1002769 Wheel Motor, Front 5003641 • Brake Shoe Kit 5003642 • Mechanical Control Kit 5003643 • Adjusting System Kit 5003651 • Motor Seal Kit 340074 Adapter, 90° 400410 Screw, 1/2-13 x 1-3/4” Hex Head 446154 Lockwasher, 1/2 Heavy 443118...
HR-9016 Serial No. All 39.1 Return Hydraulics Right Front Deck Valve T Port Right Rear Wheel Motor Right Wing Deck Motors Case Drain Case Drain Front Deck Motors Left Rear Wheel Motor Case Drain Case Drain Right Front Wheel Motor Case Drain Left Wing Deck Motors Case Drain...
Page 99
HR-9016 Item Part No. Qty. Description Serial Numbers/Notes – Return Manifold See 37.1 1003573 Hose, Pump to Return Manifold 1003575 Hose, 4WD Valve to Pump 339911 O-Ring, SAE #10 Face Seal 340065 Adapter, 90° 1003604 Hose, Rear Wheel Motor Drain 1003577 Hose, Right Tee to 4WD Valve 339961...
HR-9016 Serial No. 41.1 Charge Pressure 9016-40 Item Part No. Qty. Description Serial Numbers/Notes 340069 Adapter, 90° 340217 Adapter, Tee 339963 Locknut, Bulkhead 340377 Adapter, 90° 1003878 Tube, 4WD Valve to Tee 1003605 Hose, Tee to Pump 1003865 Tube, Lift Valve to Filter 1003864 Tube, Filter to Tee >...
HR-9016 Serial No. All 42.1 Lift Valve Hydraulics To Fitting Hose Hose Labled Part Number Destination 1003601 Right Side Cylinder Base End 1003602 Right Side Cylinder Rod End 1003599 Left Side Cylinder Base End 1003600 Left Side Cylinder Rod End 1003590 Front Lift Cylinder Rod End Tee 1003593...
Page 103
HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1003599 Hose, Right Side Cylinder Base End 1003600 Hose, Right Side Cylinder Rod End 1003601 Hose, Left Side Cylinder Base End 1003602 Hose, Left Side Cylinder Rod End 340167 Adapter, 90° Bulkhead 339961 Nut, Bulkhead 340143...
HR-9016 Serial No. All 43.1 Power Steering Hoses To Lift Valve To Lift Valve To Return Manifold From Pump To Steering Cylinder 9016-42...
Page 105
HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1003876 Tube, RT Hose to Rod End Hose 1003875 Tube, LT Hose to Base End Hose 339961 Locknut, Bulkhead 339909 O-Ring, SAE #6 Face Seal 1003606 Hose, Valve to Cylinder Tubes 1003593 Hose, Valve to Return Manifold –...
HR-9016 Serial No. All 45.1 Wire Harness Routing A - Instrument Panel B - Oil Level, Horn and Seat Relay C - Front Limit Switch and Cruise Magnet D - Front Deck Valves E - Neutral and Forward Switches F - Seat Switch and Air Ride G - Parking Brake H - Right Wing Deck Valve I - Right Deck Limit Switch...
HR-9016 Serial No. All 46.1 Steering Valve Components Part Number 1002800 TC500-28...
Page 109
HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 443108 Locknut, 5/16-18 Center Port Cover Seal, O-Ring Seal, O-RIng Seal, O-RIng 443828 Nut, 5/8-18 Hex Jam Special Bolt Port Manifold Spring, Port Side 503387 Hex Drive A and E Needle Roller 503398 Valve Ring 503398...
HR-9016 Serial No. All 48.1 Seat Assembly Part No. 5003626 3 / 4 9016-63 Item Part No. Qty. Description Serial Numbers/Notes 5003634 Pad, Back 5003635 Pad, Seat 5003636 Arm Rest, Left Side 5003637 Arm Rest, Right Side 5003690 Adjuster Assembly 554390 Seat Switch REFERENCE SW2, See 68.1...
HR-9016 Serial No. All 50.1 Rear Wheel Motor Serial No. All Part Number 5003540 19 20 ◆● ◆ ◆ ◆● ● ◆ ● ◆ ● ● ● ◆● ◆ Included In Seal Kit 557651 ● Included In Seal Kit 5002111 9016-46 Item Part No.
HR-9016 51.1 Deck Return Canister Part Number 5003371 9016-47 Item Part No. Qty. Description Serial Numbers/Notes ● O-Ring ● Back Up Ring ● Loaded U-Cup ● Rod Wiper 471214 Grease Fitting 443132 Nut, 3/4-16 Hex 5003428 Collar Assembly ● 5003427 Seal Kit Gold Star Return Canisters ●...
HR-9016 Serial No. All 53.1 Front Lift Cylinder Part Number 3006008 9016-49 Item Part No. Qty. Description Serial Numbers/Notes ● PSP Seal ● Back Up Ring ● O-Ring ● O-Ring ● Back Up Ring ● Internal Snap Ring ● External Snap Ring ●...
HR-9016 Serial No. All 54.1 Wing Lift Cylinders Part Number 3006249 9016-50 Item Part No. Qty. Description Serial Numbers/Notes ● PSP Seal ● Back Up Ring ● O-Ring ● O-Ring ● Back Up Ring ● Internal Snap Ring ● External Snap Ring ●...
HR-9016 Serial No. All 55.1 Deck Valve Part Number 4135582 4 / 5 9016-51 Item Part No. Qty. Description Serial Numbers/Notes 5002911 Relief Valve 5003579 • Seal Kit 5002912 Relief Valve 5003554 • Seal Kit 3010199 Plug, SAE #6 Located opposite Diagnostic port 339897 •...
HR-9016 Serial No. All 57.1 Decals - Decks Decks DANGER Deck Flip Up Procedure 1. Rotate anti-sway mechanism downward. (Located under tractor floorboard) 2. Start tractor engine and raise deck until gage wheels are off the ground. 3. Remove cut height adjustment pins from rear gage wheel arms.
Page 123
HR-9016 Front Left Wing Right Wing 9016-63 Item Part No. Qty. Description Serial Numbers/Notes 3009317 Decal, Caster Cut Height 3009318 Decal, Gage Wheel Cut Height 3009319 Decal, Flip Up Deck 366609 Decal, No Step 3002502 Decal, Danger > Change from previous revision...
HR-9016 Serial No. All 59.1 Front Deck Center Section 9 / 10 Front Case Case Drain Drain Inlet Outlet Inlet Outlet Case Drain Outlet Motor Orientation 9016-56...
Page 127
Flat Washer, 3/4 1003429 Shaft Assembly, Roller 3007374 Plate, Shaft Support 3008388 Adapter, Blade 2810030 Bar, Rotary Mower Cutter Models 70528 & 70529 4119024 Bar, Rotary Mower Cutter Model 70530 Only 3007764 Washer, Blade 400410 Screw, 1/2-13 x 1-3/4” Hex Head 3007368...
HR-9016 Serial No. All 60.1 Front Deck Winglets (Right Winglet Shown) 1 / 2 Front Inlet Outlet Case Case Drain Drain Motor Orientation Outlet Inlet Left Winglet Right Winglet 9016-55...
Page 129
444758 Locknut, 1/2-13 Center 400420 Screw, 1/2-13 x 3-1/2” Hex Head 3008388 Adapter, Blade 2810030 Bar, Rotary Mower Cutter Models 70528 & 70529 4119024 Bar, Rotary Mower Cutter Model 70530 Only 400410 Screw, 1/2-13 x 1-3/4”Hex Head 3007764 Washer, Blade...
HR-9016 Serial No. All 61.1 Front Deck Hydraulics Right Winglet Motor E - To Return Manifold Center Motor Right Center Motor Left Center Motor Left Winglet Motor 9016-58...
Page 131
HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 340070 Adapter, 90° 339989 Adapter, Straight 340055 Adapter, 90° 340095 Adapter, Tee Hose, Front Deck Motor Case Drain See 39.1 1003557 Hose, Winglet 2810190 Hose, Winglet Motor Drain 1003607 Hose, Left Center to Center Motor 2810189 Hose, Tee to Left Center Motor Drain 2810191...
HR-9016 Serial No. All 62.1 Wing Decks Right Wing Shown 27 28 20 / 21 1 / 2 Inlet Outlet Case Case Drain Drain Front Outlet Inlet Outlet Inlet Outlet Inlet Inlet Outlet Case Case Case Case Drain Drain Drain Drain Outlet Inlet...
Page 133
163306 Pin Assembly 400264 Screw, 3/8-16 x 1-1/4” Hex Head 3008388 Adapter, Blade 2810030 Bar, Rotary Mower Cutter Models 70528 & 70529 4119024 Bar, Rotary Mower Cutter Model 70530 Only 3007764 Washer, Blade 400410 Screw, 1/2-13 x 1-3/4” Hex Head...
HR-9016 Serial No. All 63.1 Wing Deck Hydraulics Right Outside 12 13 Motor Right Right Center Inside Motor Motor Right Wing Deck Hydraulics 12 13 Left Inside Motor Left Center Motor Left Outside Motor Left Wing Deck Hydraulics 9016-60...
Page 135
HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 340070 Adapter, 90° 339989 Adapter, Straight 339972 Adapter, Straight 340095 Adapter, Tee 1003580 Hose, Outside to Center Motor 1003579 Hose, Inside to Center Motor 2810194 Hose, Center to Inside Motor Drain 2810193 Hose, Outside to Center Motor Drain 2810192 Hose, Wing Motor Drain to Tee...
HR-9016 Serial No. 65.1 Wheel and Tire Assemblies Part Numbers 1004023 and 1004024 9016-61 Item Part No. Qty. Description Serial Numbers/Notes 550346 Tire, 11 x 4-5 Smooth 1004023 Only 5003200 Tire, 13 x 6.5-6 Multi Rib 1004024 Only 5003196 Wheel 1004023 Only 5003201 Wheel...
HR-9016 Serial No. All 67.1 Hydraulic Schematic Schematics Engine Valve 4387 psi 2.81 ci 2400 RPM Transport 1.28 ci 1.28 ci 1.28 ci .49 ci 4387 psi 2750 RPM Traction Pump 313 psi .98 ci Typ (11 Places) Right Wing Deck Valve Right Wing Motors...
Page 141
HR-9016 Front Wheel Rear Motors 15.56 ci Wheel Motors 12.5 ci 12.5 ci 15.56 ci .031 4WD Valve Steering Unit 6.6 ci Steering 1450 psi Cylinder Backpressure Valve 30 ~ 275 psi Lift Valve 1500 psi 300 psi 300 psi 300 psi .0595"...
Page 144
HR-9016 68.1 Electrical Schematic Gauges and Warning Lights YE/BK OR/BK GLOW U5.2 CHRG E D C B WH/BN 2-11 SW16 SW11 SW17 SW14 SW15 4-12 4-10 4-10...
Page 145
HR-9016 Reference Part Item Description Serial Numbers/Notes Illustration Number See 16.1 4108140 Battery See 44.1 3000359 50 Amp Circuit Breaker - Main CB-2 See 44.1 3000359 50 Amp Circuit Breaker - Pre Heat See 6.1 555846 Interlock System Diode See 6.1 555846 Test Diode See 6.1...
Page 146
HR-9016 Reference Part Item Description Serial Numbers/Notes Illustration Number SOL7 See 56.1 4134532 4WD Reverse Solenoid Coil Included in 1002977 4WD Valve SOL8 See 55.1 4134530 Center Mow Solenoid 2 Coil Included in 1004337 Deck Valve See 6.1 2810269 Ignition Switch See 48.1 554390 Seat Switch...
Page 147
Fluids and Compounds Hydraulic Fluid* 5001405 Two 2-1/2 Gallon Container of ISO VG68 Oil 5001404 One 5 Gallon Pail of ISO VG68 Oil 2500548 Two 2-1/2 Gallon Container of 10W30 Oil 2500546 One 5 Gallon Pail of 10W30 Oil 503409 Two 2-1/2 Gallon Container of ATF Fluid 503407 One 5 Gallon Pail of ATF Fluid...
HR-9016 Serial No. All 69.1 O-Ring Chart O-Ring Face O-Ring Boss O-Ring Face O-Ring Face O-Ring Boss O-Ring Boss Seal Size Dash Size Seal Size Seal Size Dash Size Dash Size W-X-Y W-X-Y W-X-Y O-Ring Face O-Ring Not O-Ring Face O-Ring Boss O-Ring Face O-Ring Not...
Page 154
Equipment from Jacobsen is built to exacting standards ensured by ISO 9001 and ISO 14001 registration at all of our manufacturing locations. A worldwide dealer network and factory trained technicians backed by Textron Parts Xpress provide reliable, high-quality product support.