Installation 4
3
1
Choose a stable, level
surface.
12 cm
or more
2
Determine the most convenient
location for the main unit,
and then decide the direction
to extend the hose (using the
opening section).
TK-CS200_01_EN.indd
TK-CS200_01_EN.indd
8
8
I nstalling the Water Purifier
4
2
12 cm
or more
Opening section
3
After completing the preparations,
connect the hose.
①
Remove the hose fastening nut from
the bypass selector, and pass the hose
through the nut.
②
Insert the hose into the bypass selector
as far as it will go.
③
Tighten up the hose fastening nut
securely.
z Do not use any tools for this assembly
(since the hose fastening nut may be
damaged).
① ③
< OK >
4
Attach the outlet pipe.
Push it in firmly as far as it will go.
z
Ensure that the gasket does not
z
come off or protrude from the groove,
preventing it from twisting
(since this may cause the water to leak).
Do not lift the main unit by taking hold of
z
the outlet pipe (Doing so damage may
result).
5
Affix the cartridge replacement
label.
Enter the use start date with an oil-
z
based pen, and affix it to the main body.
②
< NG >
Gap
EN9
2022/12/15
2022/12/15
18:41:41
18:41:41