IH70 Motherboard User Manual /
Engineering Spec.
3.3 Using Recovery Wizard to Restore Computer
IH70 computer has a dedicate recovery partition stored on the hard drive of the PC to enable
quick one-key recovery process. This partition occupies about 11GB of the storage space, and
comes built-in to each IH70 series PC.
Warning: Before starting the recovery process, be sure to backup all user data, as all data will
be lost after the recovery process.
Follow the procedure below to enable quick one-key recovery procedure:
• Plug-in the AC adapter to Bay Trail series computer. Make sure the computer
stays plugged in to power source during the recovery process.
• Turn on the computer, and when the boot screen shows up, press the F6 to
initiate the Recovery Wizard.
• The following screen shows the Recovery Wizard. Click on "Recovery" button to
continue.
A warning message about data loss will show up. Make sure data is backed up
before recovery, and click on "Yes" to continue.
IH70 Motherboard User Manual
61