Chapter 2 Installations; So-Dimm）I Nstallation - Winmate IH70 User Manual

Mini-itx sbc with w/ intel 4th generation core i3/i5/i7 processor, vga, lvds, dual giga ethernet, usb 3.0 and mini-pcie interface.

Hide thumbs Also See for IH70:

Table of Contents

IH70 Motherboard User Manual /

Engineering Spec.

Chapter 2

Installations

2.1 Memory Module（（（（ SO-DIMM）））） Installation

The IH70 Motherboard provides two 204-pin SODIMM slot. The socket supports up

to 16GB DDR3L 1333/1600 SDRAM. When installing the Memory device, please follow

the steps below：

Step.1. Firmly insert the SO-DIMM at an angle into its slot. Align the SO-DIMM on the

slot such that the notch on the SO-DIMM matches the break on the slot.

Step.2. Press downwards on SO-DIMM until the retaining clips at both ends fully snap

back in place and the SO-DIMM is properly seated.

Caution

The SO-DIMM only fits in one correct orientation. It will cause

permanent damage to the development board and the SO-DIMM if

the SO-DIMM is forced into the slot at the incorrect orientation.

IH70 Motherboard User Manual

Table of Contents