Anti-Virus Black List Or White List Add/Edit - ZyXEL Communications ZyWALL 110 User Manual

The following table describes the labels in this screen.
Table 214 Configuration > UTM Profile > Anti-Virus > Black/White List > Black List
LABEL
Enable Black List
Add
Edit
Remove
Activate
Inactivate
Status
#
File Pattern
Apply
Reset

31.3.1 Anti-Virus Black List or White List Add/Edit

From the Configuration > UTM Profile > Anti-Virus > Black/White List > Black List (or
White List) screen, click the Add icon or an Edit icon to display the following screen.
• For a black list entry, enter a file pattern that should cause the ZyWALL/USG to log and delete a
file.
• For a white list entry, enter a file pattern that should cause the ZyWALL/USG to allow a file.
Figure 348 Configuration > UTM Profile > Anti-Virus > Black/White List > Black List (or White List)
> Add
Chapter 31 Anti-Virus
DESCRIPTION
Select this check box to log and delete files with names that match the black list
patterns. Use the black list to log and delete files with names that match the black list
patterns.
Click this to create a new entry.
Select an entry and click this to be able to modify it.
Select an entry and click this to delete it.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
The activate (light bulb) icon is lit when the entry is active and dimmed when the entry
is inactive.
This is the entry's index number in the list.
This is the file name pattern. If a file's name that matches this pattern, the ZyWALL/
USG logs and deletes the file.
Click Apply to save your changes.
Click Reset to return the screen to its last-saved settings.
ZyWALL/USG Series User's Guide
525