Access the Configuration > VPN > IPSec VPN > VPN Gateway > Edit screen.
1
Click Show Advance Setting and select Enable Extended Authentication.
2
Select Server Mode and select an authentication method object from the drop-down list box.
3
Click OK to save the settings.
4
Figure 428 Example: Using Authentication Method in VPN
35.10.3 Authentication Method Objects
Click Configuration > Object > Auth. Method to display the screen as shown.
Note: You can create up to 16 authentication method objects.
Figure 429 Configuration > Object > Auth. Method
The following table describes the labels in this screen.
Table 280 Configuration > Object > Auth. Method
LABEL
Add
Edit
Remove
Object
References
#
Method Name
Method List
Chapter 35 Object
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field displays the index number.
This field displays a descriptive name for identification purposes.
This field displays the authentication method(s) for this entry.
ZyWALL/USG Series User's Guide
638