ZyXEL Communications ZyWALL 110 User Manual page 521

Figure 345 Configuration > UTM Profile > Anti-Virus > Profile
The following table describes the labels in this screen.
Table 212 Configuration > UTM Profile > Anti-Virus > Profile
LABEL DESCRIPTION
General Setting
Scan and detect Select this option to have the ZyWALL/USG check for the EICAR test file and treat it in
EICAR test virus the same way as a real virus file. The EICAR test file is a standardized test file for
signature based anti-virus scanners. When the virus scanner detects the EICAR file, it
responds in the same way as if it found a real virus. Besides straightforward detection,
the EICAR file can also be compressed to test whether the anti-virus software can
detect it in a compressed file. The test string consists of the following human-readable
ASCII characters.
X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*
Profile Management
Add Click this to create a new entry. Select an entry and click Add to create a new entry
after the selected entry.
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
Object Reference Select an entry and click Object References to open a screen that shows which
settings use the entry. Click Refresh to update information in this screen.
# This displays the index number of the rule.
Name This displays the name for the anti-virus rule.
Description This displays the description of the anti-virus rule.
Reference This displays the number of times an Object Reference is used in a rule.
Chapter 31 Anti-Virus
ZyWALL/USG Series User's Guide
521