The Nat Add/Edit Screen - ZyXEL Communications ZyWALL 110 User Manual

Table 128 Configuration > Network > NAT (continued)
LABEL
Apply
Reset

12.2.1 The NAT Add/Edit Screen

The NAT Add/Edit screen lets you create new NAT rules and edit existing ones. To open this
window, open the NAT summary screen. (See
icon or Edit icon to open the following screen.
Figure 199 Configuration > Network > NAT > Add
The following table describes the labels in this screen.
Table 129 Configuration > Network > NAT > Add
LABEL
Create new Object
Enable Rule
Rule Name
Chapter 12 NAT
DESCRIPTION
Click this button to save your changes to the ZyWALL/USG.
Click this button to return the screen to its last-saved settings.
DESCRIPTION
Use to configure any new settings objects that you need to use in this screen.
Use this option to turn the NAT rule on or off.
Type in the name of the NAT rule. The name is used to refer to the NAT rule. You may
use 1-31 alphanumeric characters, underscores(
character cannot be a number. This value is case-sensitive.
ZyWALL/USG Series User's Guide
298
Section 12.2 on page 296.) Then, click on an Add
), or dashes (-), but the first
_