ZyXEL Communications ZyWALL 110 User Manual page 167

Table 75 Configuration > Wireless > AP Management > Mgnt. AP List > Edit AP List (continued)
LABEL DESCRIPTION
Radio 1/2 OP Mode Select the operating mode for radio 1 or radio 2.
AP Mode means the AP can receive connections from wireless clients and pass their
data traffic through to the ZyWALL/USG to be managed (or subsequently passed on to
an upstream gateway for managing).
MON Mode means the AP monitors the broadcast area for other APs, then passes their
information on to the ZyWALL/USG where it can be determined if those APs are friendly
or rogue. If an AP is set to this mode it cannot receive connections from wireless
clients.
Radio 1/2 Profile Select a profile from the list. If no profile exists, you can create a new one through the
Create new Object menu.
Override Group Select this option to overwrite the AP output power setting with the setting you
Output Power configure here.
Setting
Output Power Set the output power of the AP.
Override Group Select this option to overwrite the AP SSID profile setting with the setting you configure
SSID Setting here.
This section allows you to associate an SSID profile with the radio.
Edit Select an SSID and click this button to reassign it. The selected SSID becomes editable
immediately upon clicking.
# This is the index number of the SSID profile. You can associate up to eight SSID profiles
with an AP radio.
SSID Profile Indicates which SSID profile is associated with this radio profile.
Force Overwrite Select this to have the ZyWALL/USG change the AP's management VLAN to match the
VLAN Config configuration in this screen.
Management VLAN Enter a VLAN ID for this AP.
ID
As Native VLAN Select this option to treat this VLAN ID as a VLAN created on the ZyWALL/USG and not
one assigned to it from outside the network.
OK Click OK to save your changes back to the ZyWALL/USG.
Cancel Click Cancel to close the window with changes unsaved.
Chapter 8 Wireless
ZyWALL/USG Series User's Guide
167