Configuring The System Default Trunk - ZyXEL Communications ZyWALL 110 User Manual

Hide thumbs Also See for ZyWALL 110:
Table of Contents

Advertisement

Table 112 Configuration > Network > Interface > Trunk > Add (or Edit) (continued)
LABEL
Ingress Bandwidth
Egress Bandwidth
Spillover
OK
Cancel

9.12.2 Configuring the System Default Trunk

In the Configuration > Network > Interface > Trunk screen and the System Default section,
select the default trunk entry and click Edit to open the following screen. Use this screen to
change the load balancing algorithm and view the bandwidth allocations for each member interface.
Note: The available bandwidth is allocated to each member interface equally and is not
allowed to be changed for the default trunk.
Figure 179 Configuration > Network > Interface > Trunk > Edit (System Default)
Chapter 9 Interfaces
DESCRIPTION
This is reserved for future use.
This field displays with the least load first load balancing algorithm. It displays the
maximum number of kilobits of data the ZyWALL/USG is to allow to come in through
the interface per second.
Note: You can configure the bandwidth of an interface in the corresponding interface edit
screen.
This field displays with the least load first or spillover load balancing algorithm. It
displays the maximum number of kilobits of data the ZyWALL/USG is to send out
through the interface per second.
Note: You can configure the bandwidth of an interface in the corresponding interface edit
screen.
This field displays with the spillover load balancing algorithm. Specify the maximum
bandwidth of traffic in kilobits per second (1~1048576) to send out through the
interface before using another interface. When this spillover bandwidth limit is
exceeded, the ZyWALL/USG sends new session traffic through the next interface. The
traffic of existing sessions still goes through the interface on which they started.
The ZyWALL/USG uses the group member interfaces in the order that they are listed.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving.
ZyWALL/USG Series User's Guide
265

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents