User/Group Overview - ZyXEL Communications ZyWALL 110 User Manual

35.1.2.1 Zone Edit
The Zone Edit screen allows you to add or edit a zone. To access this screen, go to the Zone
screen (see
Figure 377 Configuration > Object > Zone > Add
The following table describes the labels in this screen.
Table 234 Configuration > Object > Zone > Add/Edit
LABEL
Name
Member List
OK
Cancel

35.2 User/Group Overview

This section describes how to set up user accounts, user groups, and user settings for the ZyWALL/
USG. You can also set up rules that control when users have to log in to the ZyWALL/USG before
the ZyWALL/USG routes traffic for them.
• The User screen (see
Section 35.8.2 on page
DESCRIPTION
For a system default zone, the name is read only.
For a user-configured zone, type the name used to refer to the zone. You may use 1-31
alphanumeric characters, underscores (
be a number. This value is case-sensitive.
Available lists the interfaces and VPN tunnels that do not belong to any zone. Select
the interfaces and VPN tunnels that you want to add to the zone you are editing, and
click the right arrow button to add them.
Member lists the interfaces and VPN tunnels that belong to the zone. Select any
interfaces that you want to remove from the zone, and click the left arrow button to
remove them.
Click OK to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving.
Section 35.14.1 on page
ZyWALL/USG Series User's Guide
Chapter 35 Object
624), and click the Add icon or an Edit icon.
), or dashes (-), but the first character cannot
_
664) provides a summary of all user accounts.
572