The Network Tool Screen - ZyXEL Communications ZyWALL 110 User Manual

39.5 The Network Tool Screen

Use this screen to ping or traceroute an IP address.
Click Maintenance > Diagnostics > Network Tool to display this screen.
Figure 528 Maintenance > Diagnostics > Network Tool
The following table describes the labels in this screen.
Table 340 Maintenance > Diagnostics > Network Tool
LABEL
Network Tool
Domain Name or IP
Address
Test
Stop
Reset
Chapter 39 Diagnostics
DESCRIPTION
Select PING IPv4 to ping the IP address that you entered.
Select TRACEROUTE IPv4 to perform the traceroute function. This determines the
path a packet takes to the specified computer.
Type the IPv4 address of a computer that you want to perform ping or traceroute in
order to test a connection.
Click this button to start to ping or run a traceroute.
Click this button to terminate the current ping operation or traceroute.
Click this button to return the screen to its last-saved settings.
ZyWALL/USG Series User's Guide
756