Language Screen; Ipv6 Screen - ZyXEL Communications ZyWALL 110 User Manual

Table 319 Configuration > System > CloudCNM (continued)
LABEL
Periodic Inform
Interval
Apply
Reset
Note: See the CloudCNM User Guide for more information on CloudCNM.

36.14 Language Screen

Click Configuration > System > Language to open the following screen. Use this screen to
select a display language for the ZyWALL/USG's Web Configurator screens.
Figure 498 Configuration > System > Language
The following table describes the labels in this screen.
Table 320 Configuration > System > Language
LABEL
Language Setting
Apply
Reset

36.15 IPv6 Screen

Click Configuration > System > IPv6 to open the following screen. Use this screen to enable
IPv6 support for the ZyWALL/USG's Web Configurator screens.
Figure 499 Configuration > System > IPv6
Chapter 36 System
DESCRIPTION
Enable this to have the ZyWALL/USG inform the CloudCNM server of its presence at
regular intervals.
Type how often the ZyWALL/USG should inform CloudCNM server of its presence.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Select a display language for the ZyWALL/USG's Web Configurator screens. You also
need to open a new browser session to display the screens in the new language.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
ZyWALL/USG Series User's Guide
716