15.2.2 Cautions with UPnP and NAT-PMP
The automated nature of NAT traversal applications in establishing their own services and opening
security policy ports may present network security issues. Network information and configuration
may also be obtained and modified by users in some network environments.
When a UPnP or NAT-PMP device joins a network, it announces its presence with a multicast
message. For security reasons, the ZyWALL/USG allows multicast messages on the LAN only.
All UPnP-enabled or NAT-PMP-enabled devices may communicate freely with each other without
additional configuration. Disable UPnP or NAT-PMP if this is not your intention.
15.3 UPnP Screen
Use this screen to enable UPnP and NAT-PMP on your ZyWALL/USG.
Click Configuration > Network > UPnP to display the screen shown next.
Figure 211 Configuration > Network > UPnP
Chapter 15 UPnP
ZyWALL/USG Series User's Guide
316