DURKOPP ADLER 967 Instruction Manual page 65

Hide thumbs Also See for 967:

Table of Contents

Adjusting the sewing foot feed

For correct feed, the stroke movement for the feeding foot must be aligned

to the stroke movement for the feed dog.

Proper setting

Left adjusting wheel for the sewing foot stroke set to maximum stroke and

the upper stitch length adjusting wheel set to 0.

 The feeding foot (1) touches down exactly on the feed dog (2) when

Fig. 44: Stroke movement for the feeding foot and feed dog

Cover

• Arm cover ( p. 11).

Abb. 45: Setting the point in time for when the feeding foot touches down

Service Instructions 967 - 02.0 - 12/2015

the downwards movement of the needle tip (3) reaches the upper

edge of the feeding foot. This will occur when the handwheel is in the

95° position.

(1) - Feeding foot

(2) - Feed dog

①

②

(1) - Stroke eccentric

(2) - Setscrews

(3) - Needle tip

(3) - Plates

(4) - Setscrew

④

③

Table of Contents