DURKOPP ADLER 967 Instruction Manual page 47

Setting the feed dog
Cover
• Remove the upper right cover ( p. 11)
Fig. 31: Setting the feed dog stroke
Setting steps
1. Loosen the setscrews (1).
2. Put the handwheel into the 90° position.
3. Turn the stroke eccentric (2) such that the upper edge of the feed dog
4. Tighten the setscrews (1).
5. Check if the feed dog is at the same height at 90° and 270°; adjust if
Service Instructions 967 - 02.0 - 12/2015
①
(1) - Setscrews
when moving upwards is at the same height as the upper edge of the
throat plate.
necessary.
(2) - Stroke eccentric
②
45