NETGEAR GS700TP Software Administration Manual page 107

GS700TP Smart Switch Software Administration Manual
Figure 4-8
The LACP Configuration screen contains the following field:
• LACP System Priority – Enter the system priority value. The field range is 1-65535. The
field default is 1.
2. Enter the LACP System Priority in the provided field.
3. Click APPLY to update the device.
LACP Port Configuration
The LACP Port Configuration screen provides information and parameters for configuring the
LACP Priority and Timeout fields on interfaces.
To configure LACP port priority:
1. Click Switching > LAG > Advanced > LACP Port Configuration. The LACP Port
Configuration screen displays:
4-13
v1.0, November 2009
Configuring Switching Settings