NETGEAR GS700TP Software Administration Manual page 202

GS700TP Smart Switch Software Administration Manual
• Priority – Enter the rule priority. When the packet is matched to a rule, user groups are
either granted permission or denied device management access. The rule number is
essential to matching packets to rules, as packets are matched on a first-fit basis.
• Protocol ID – Enter the protocol in the rule to which the packet is matched.
• Source IP Address – Enter the source IP Address.
• Source Mask – Enter the mask of the new source IP address.
• Destination IP Address – Enter the destination IP address.
• Destination Mask – Enter the mask of the new destination IP address.
• Source Port – Enter the source port that is matched to packets.
• Destination Port – Enter the destination port that is matched to packets.
• Action – Select the action applied to packets with IP addresses that have been filtered. The
possible field values are:
– Permit – Permits access to the device.
– Deny – Denies access to packets originating from the blocked IP address.
– Shutdown – Drops packets that meet the ACL criteria, and disable the port to which
the packet was addressed.
2. Select the ACL Name from the list in the provided field.
3. Select the rule entry.
4. Enter the provided fields in the first row.
5. Click APPLY to update the device.
To add an IPv4 rule:
1. Click Security > ACL > IPv4 Rules. The IPv4 Rules screen displays.
2. Select the ACL Name from the list in the provided field.
3. Enter the provided fields in the first row.
4. Click ADD to create a new entry.
To delete an IPv4 rule:
1. Click Security > ACL > IPv4 Rules. The IPv4 Rules screen displays.
2. Select the ACL Name from the list in the provided field.
Managing Security
v1.0, November 2009
6-30