NETGEAR GS700TP Software Administration Manual page 47

GS700TP Smart Switch Software Administration Manual
2. Enter the System Usage Threshold in the provided field.
3. Select the Traps mode from the list in the provided field.
4. Click APPLY to update the device.
PoE Port Configuration
The PoE Port Configuration screen contains PoE class and power consumption information per
interface, while allowing the network manager to define the interface PoE Operation Status and
Priority Level.
To configure PoE ports the device:
1.
Click System > PoE > Advanced > PoE Port Configuration. The PoE Port Configuration
screen displays:
Figure 3-8
The PoE Port Configuration screen contains the following fields:
• Interface – Displays the specific interface for which PoE parameters are defined. PoE
parameters are assigned to the powered device that is connected to the selected interface.
• Admin Mode – Select the device PoE mode. The possible field values are:
3-13
v1.0, November 2009
Managing System Settings