Log Filter - NETGEAR GS700TP Software Administration Manual

GS700TP Smart Switch Software Administration Manual
The Logs Configuration screen contains the following field:
• Logging State – Select whether to enable or disable the device global logs for Cache, File
and Server Logs. Console logs are enabled by default. The possible field values are:
– Disable – Disables device logs.
– Enable – Enables device logs. This is the default value.
2. Select either Enable or Disable as the Logging State in the provided field.
3. Click APPLY to update the device.

Log Filter

The Log Filter screen contains fields for defining which events are recorded to which logs. Log
messages are listed from the highest severity to the lowest severity level.
To configure log filters:
1. Click Monitoring > Logs > Log Filter. The Log Filter screen displays:
Figure 7-2
7-3
v1.0, November 2009
Monitoring the Switch