NETGEAR GS700TP Software Administration Manual page 91

GS700TP Smart Switch Software Administration Manual
• Device Class – Displays the LLDP-MED endpoint device class. The possible device
classes are:
– Endpoint Class 1 – Indicates a generic endpoint class, offering basic LLDP services.
– Endpoint Class 2 – Indicates a media endpoint class, offering media streaming
capabilities as well as all Class 1 features.
– Endpoint Class 3 – Indicates a communications device class, offering all Class 1 and
Class 2 features plus location, 911, Layer 2 switch support and device information
management capabilities.
• PoE Device Type – Displays the port PoE type. For example, Powered.
• PoE Power Source – Displays the port's power source.
• PoE Power Priority – Displays the port's power priority.
• PoE Power Value – Displays the port's power value.
• Hardware Revision – Displays the hardware version.
• Firmware Revision – Displays the firmware version.
• Software Revision – Displays the software version.
• Serial Number – Displays the device serial number.
• Manufacturer Name – Displays the device manufacturer name.
• Model Name – Displays the device model name.
• Asset ID – Displays the asset ID.
Location Information
• Civic – Displays the device's civic or street address location. For example, 123 45th St E.
The field value length range is 6 - 160 characters.
• Coordinates – Displays the device's location map coordinates - latitude, longitude and
altitude.
• ECS ELIN – Displays the device's Emergency Call Service (ECS) Emergency Location
Identification Number (ELIN). The field range is 10 - 25.
• Unknown – Displays unknown location information.
Network Policies
• Application Type – Displays the network policy application type. For example, Voice.
• VLAN ID – Displays the VLAN ID for which the network policy is defined.
3-57
v1.0, November 2009
Managing System Settings