This appendix provides default settings for the NETGEAR Model GS700TP Smart Switch. You
can always configure the switch to default settings by using the Factory Reset function from a Web
browser.
Table 1:
Default Settings
Feature
Port Speed
Port Duplex
Flow Control (half duplex)
Flow Control (full duplex)
IP Configuration
Password
VLAN
Link Aggregation (Trunk)
Traffic Prioritization (QoS)
GS700TP Default Setting
Auto-negotiation
Auto-negotiation
Disabled
Disabled
DHCP enabled
password
802.1q based VLAN
Disabled
Optimized for flow control, all ports set normal priority
v1.0, November 2009
Appendix A
Default Settings
Appendix A-1