NETGEAR GS700TP Software Administration Manual page 198

GS700TP Smart Switch Software Administration Manual
• Source Mask – Enter the mask of the new source MAC address.
• Destination MAC Address – Enter the destination MAC address.
• Destination Mask – Enter the mask of the new destination MAC address.
• VLAN ID – Enter the VLAN ID to which the MAC address is attached in the MAC Rules
database.
• Action – Select the action applied to packets with MAC addresses that have been filtered.
The possible field values are:
– Permit – Permits access to the device.
– Deny – Denies access to packets originating from the blocked MAC address.
– Shutdown – Drops packets that meet the ACL criteria, and disable the port to which
the packet was addressed.
2. Select the ACL Name from the list in the provided field.
3. Select the rule entry.
4. Enter the provided fields in the first row.
5. Click APPLY to update the device.
To add a MAC rule:
1. Click Security > ACL > MAC Rules. The MAC Rules screen displays.
2. Select the ACL Name from the list in the provided field.
3. Enter the provided fields in the first row.
4. Click ADD to update the device.
To delete a MAC rule:
1. Click Security > ACL > MAC Rules. The MAC Rules screen displays.
2. Select the ACL Name from the list in the provided field.
3. Select the rule entry.
4. Click DELETE to remove the entry.
Managing Security
v1.0, November 2009
6-26