NETGEAR GS700TP Software Administration Manual page 39

GS700TP Smart Switch Software Administration Manual
2. Select the method of assigning the IP address by selecting either Get Dynamic IP from
DHCP Server or Static IP Address.
3. If you selected Static IP Address, enter the IP Address, Subnet Mask and Gateway address.
4. Select a VLAN in the Management VLAN ID in the provided fields.
5. Click APPLY to update the system settings.
Time
The Time menu enables local system time or SNTP server configuration, and contains the
following options:
• "Time Configuration"
• "SNTP Server Configuration"
Time Configuration
The Time Configuration screen contains information for defining both the local hardware clock
and the external SNTP clock. If the system time is managed via an external SNTP clock, and the
external SNTP clock fails, the system time reverts to the local hardware clock.
To configure the local system time:
1. Click System > Management > Time > Time Configuration. The Time Configuration
screen displays:
3-5
v1.0, November 2009
Managing System Settings