NETGEAR GS700TP Software Administration Manual page 101

GS700TP Smart Switch Software Administration Manual
4. Click APPLY to update the device.
LAG Membership
The Basic LAG Membership screen allows network managers to assign ports to LAGs.
To assign ports to LAGs:
1. Click Switching > LAG > Basic > LAG Membership. The Basic LAG Membership screen
displays:
Figure 4-3
The Basic LAG Membership screen contains the following fields:
• LAG ID – Select the LAG ID.
• LAG Name – Displays the user-defined LAG name.
• LAG Type – Select the LAG type. The possible field values are:
– Static – Indicates the LAG is configured manually.
– LACP – Indicates the LAG is configured dynamically.
2. Select the LAG ID and LAG Type.
4-7
v1.0, November 2009
Configuring Switching Settings