NETGEAR GS700TP Software Administration Manual page 66

GS700TP Smart Switch Software Administration Manual
Global Trap Configuration
The SNMPv3 Global Trap Settings screen contains parameters for defining SNMP notification
parameters.
To configure SNMP notification global parameters:
1. Click System > SNMP > SNMPv3 > Global Trap Configuration. The SNMPv3 Global
Trap Settings screen displays:
Figure 3-17
The SNMPv3 Global Trap Settings screen contains the following fields:
• SNMP Notifications – Select whether or not the device can send SNMP notifications.
The possible field values are:
– Disable – Disables SNMP notifications.
– Enable – Enables SNMP notifications. The is the default value.
Managing System Settings
v1.0, November 2009
3-32