NETGEAR GS700TP Software Administration Manual page 194

GS700TP Smart Switch Software Administration Manual
Figure 6-11
The Protected Ports Membership screen contains the following fields:
Protected Ports Membership Table
• Port Number (1-XX) – Displays the unprotected and protected ports on the device.
2. Select the interfaces to the be defined as a Protected Port by one of the following methods.
a. Click on the port's Unit's or LAG's gold bar to display the associated interfaces, and then
select the interfaces to bind by clicking on the boxes below the interfaces.
or
b. Click on the port's or LAG's quick box to select all the associated interfaces.
3. Click on the gold button. The port panel displays.
4. Select the ports to be defined as protected ports.
5. Click APPLY to update the device.
Managing Security
v1.0, November 2009
6-22