GS700TP Smart Switch Software Administration Manual
To define LLDP Port Properties:
1. Click System > LLDP > Advanced > LLDP Port Settings. The LLDP Port Settings screen
displays:
Figure 3-23
The LLDP Port Settings screen contains the following fields:
•
Interface – Displays the specific interface for which LLDP parameters are defined.
•
Admin Status – Select the LLDP packet transmitting and receiving status of the interface.
The possible field values are:
–
Tx Only – Enables transmitting LLDP packets only.
–
Rx Only – Enables receiving LLDP packets only.
–
Tx & Rx – Enables transmitting and receiving LLDP packets.
–
Disable – Disables LLDP on the interface.
•
Management IP Address – Select the management IP address that is advertised from the
interface. The possible field values are:
–
StopAdvertise – Stops advertising the management IP address from the interface.
Managing System Settings
v1.0, November 2009
3-44