Compatible Devices; Installing Batteries - Vello FWIRC-C FREEWAVE User Manual

COMPATIBLE DEVICES

The Vello FWIRC-C FreeWave
IR Commander is compatible
with Canon's E-TTL and E-TTL II
(evaluative through-the-lens) system.
To make full use of the FreeWave IR
Commander, use E-TTL-capable hot-
shoe flashes that are fully compatible
with your camera's E-TTL system.
8

INSTALLING BATTERIES

The FreeWave Commander is
powered by two AA batteries. To
install batteries, make sure the device
is turned off and follow these steps:
1. Press and slide the battery
compartment cover in the direction
of the arrow to open.
2. Insert batteries in the orientations
indicated by the illustrations inside
the compartment.
3. Close the battery compartment
cover by pressing and sliding it in the
opposite direction of the arrow on
the cover.