Self-Timer Mode - Vello FreeWave Viewer VL User Manual

Self-Timer Mode

1. Set your camera to Single Shot
drive mode.
2. Press the Menu
the Receiver/Viewer and go to
Drive mode. Use the Set
button to navigate to the clock
icon [ ].
3. Half press the shutter button
on the Receiver/Viewer to focus
the camera. Full press to release
the shutter. The camera's
shutter will be triggered 5
seconds later, giving you time
to get into the picture, for
instance.
Note: You can set your camera
to Self-Timer mode while leaving
the Receiver/Viewer in single shot
button on mode.
Bulb (Long Exposure) Mode
1. Set your camera to Bulb drive
mode.
2. Press the Menu
the Receiver/Viewer and go to
Drive mode.
3. Using the Set
navigate to Bulb shooting mode
[ ].
4. Half press the shutter on the
Receiver/Viewer to focus the
subject.
5. To start the exposure, fully
press the shutter button on
the Receiver/Viewer. Both the
shutter LED on the receiver
and the shutter LED on the
transmitter will stay red. To end
button on the exposure, half press the
shutter button again. Both LEDs
will turn off.
button,
21